Pressure Treated Pine Deck Boards
Pressure-treated pine deck boards, sanded to 5/4x6 inches and exceeding 6 mm in thickness, are used for outdoor decking. The boards are treated with a copper-based preservative and sealed with paint. As coniferous wood sawn lengthwise and treated with preservatives, these boards fall under this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (2)Show detailsHide detailsCFIAAll ProgramsRequiredECCCWildlife Enforcement - commodity may be regulated by ECCCRequired
- CFIA
All Programs · Required
CANADIAN FOOD INSPECTION AGENCY: CFIA All Programs requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 4406110000–4412990000).
- ECCC
Wildlife Enforcement - commodity may be regulated by ECCC · Required
ENVIRONMENT AND CLIMATE CHANGE CANADA: ECCC Wildlife Enforcement - commodity may be regulated by ECCC requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Starts With 4407).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the boards are of pine (Pinus spp.) and not treated
Pine is specifically listed under subheading 4407.11, which is more specific than the 'other' subheading.
If the boards are continuously shaped along their edges, such as tongue-and-groove
Continuously shaped wood is classified under heading 44.09.
If the boards are cut to size and finished as decking components
Wood articles not elsewhere specified fall under heading 44.21.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the copper-based preservative is approved for use in Canada
• Ensure the boards are properly marked and documented as treated
• If the boards are for residential decking, check if they meet Canadian building code requirements
Related Products under Tariff item 4407.19.00
Creosote Douglas Fir Railway Ties
Creosote-treated Douglas fir railway ties, sawn to 8x10x8 feet and exceeding 6 mm in thickness, are used for railroad track support. The creosote pressure treatment preserves the wood for outdoor and ground-contact use. As coniferous wood sawn lengthwise and treated with preservatives, these ties fall under this tariff item.
Creosote Treated Fir Fence Posts
Creosote-treated fir fence posts, sawn to 4x4x8 feet and exceeding 6 mm in thickness, are used for ground-contact fencing applications. The creosote pressure treatment provides durability against rot and insects. As coniferous wood sawn lengthwise and treated with preservatives, these posts fall under this tariff item.
Douglas-Fir 2x12 Rough Joist Lumber
Douglas-Fir 2x12 Rough Joist Lumber consists of nominal 2x12 rough-sawn, untreated coniferous joists measuring 5.1 cm x 30.5 cm, with a minimum dimension of exactly 5.1 cm. Sawn lengthwise to a thickness exceeding 6 mm, these joists are used for floor construction and are not planed, sanded, or end-jointed, falling under tariff item 4407.19.00.
Douglas-Fir 2x4 Rough Boards
Untreated rough-sawn Douglas-fir boards in nominal 2x4 dimensions, where the actual thickness of 3.8 cm exceeds 6 mm, are used for stud framing in residential construction. The boards are sawn lengthwise and not planed, sanded or end-jointed. As coniferous wood not elsewhere specified, these boards fall under this tariff item.
Douglas-Fir 4x8 Rough Framing Lumber
Douglas-Fir 4x8 Rough Framing Lumber is rough-sawn, untreated coniferous lumber measuring 10.2 cm x 20.3 cm, with a minimum dimension of 10.2 cm. Sliced lengthwise from coniferous logs to a thickness exceeding 6 mm, this lumber is used for construction framing and is not planed, sanded, or end-jointed, qualifying under tariff item 4407.19.00.
Douglas-Fir 5x6 Rough Sawn Studs
Douglas-Fir 5x6 Rough Sawn Studs are rough-sawn, untreated coniferous studs measuring 12.7 cm x 15.2 cm, with a minimum dimension of 12.7 cm. Sawn lengthwise to a thickness exceeding 6 mm, these studs are used for wall framing and are not planed, sanded, or end-jointed, falling under tariff item 4407.19.00.