Finger-Jointed Lodgepole Pine Boards
Finger-jointed lodgepole pine boards, sawn lengthwise and exceeding 6 mm in thickness, are used for paneling and other rustic interior applications. The finger-jointing process end-joints the boards, which is permitted under this tariff item as the wood remains sawn and not further worked beyond planing, sanding or end-jointing. As coniferous wood not elsewhere specified, it falls under tariff item 4407.19.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (2)Show detailsHide detailsCFIAAll ProgramsRequiredECCCWildlife Enforcement - commodity may be regulated by ECCCRequired
- CFIA
All Programs · Required
CANADIAN FOOD INSPECTION AGENCY: CFIA All Programs requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 4406110000–4412990000).
- ECCC
Wildlife Enforcement - commodity may be regulated by ECCC · Required
ENVIRONMENT AND CLIMATE CHANGE CANADA: ECCC Wildlife Enforcement - commodity may be regulated by ECCC requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Starts With 4407).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the boards are of pine (Pinus spp.) and not finger-jointed
Pine is a coniferous species specifically listed under this subheading, which takes precedence over the 'other' subheading.
If the boards are continuously shaped along any of their edges, ends or faces
Continuously shaped wood (e.g., tongue-and-groove) is classified under heading 44.09, not 44.07.
If the boards are worked beyond the stage of sawn wood, such as being assembled into panels
Articles of wood not elsewhere specified fall under heading 44.21.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the boards are classified as coniferous wood and that the finger-jointing does not transform them into an article of another heading
• Have documentation showing the thickness exceeds 6 mm and that the wood is not treated with preservatives, as treated wood may fall under a different tariff item
• Verify the country of origin to determine if a free trade agreement rate applies
Related Products under Tariff item 4407.19.00
Creosote Douglas Fir Railway Ties
Creosote-treated Douglas fir railway ties, sawn to 8x10x8 feet and exceeding 6 mm in thickness, are used for railroad track support. The creosote pressure treatment preserves the wood for outdoor and ground-contact use. As coniferous wood sawn lengthwise and treated with preservatives, these ties fall under this tariff item.
Creosote Treated Fir Fence Posts
Creosote-treated fir fence posts, sawn to 4x4x8 feet and exceeding 6 mm in thickness, are used for ground-contact fencing applications. The creosote pressure treatment provides durability against rot and insects. As coniferous wood sawn lengthwise and treated with preservatives, these posts fall under this tariff item.
Douglas-Fir 2x12 Rough Joist Lumber
Douglas-Fir 2x12 Rough Joist Lumber consists of nominal 2x12 rough-sawn, untreated coniferous joists measuring 5.1 cm x 30.5 cm, with a minimum dimension of exactly 5.1 cm. Sawn lengthwise to a thickness exceeding 6 mm, these joists are used for floor construction and are not planed, sanded, or end-jointed, falling under tariff item 4407.19.00.
Douglas-Fir 2x4 Rough Boards
Untreated rough-sawn Douglas-fir boards in nominal 2x4 dimensions, where the actual thickness of 3.8 cm exceeds 6 mm, are used for stud framing in residential construction. The boards are sawn lengthwise and not planed, sanded or end-jointed. As coniferous wood not elsewhere specified, these boards fall under this tariff item.
Douglas-Fir 4x8 Rough Framing Lumber
Douglas-Fir 4x8 Rough Framing Lumber is rough-sawn, untreated coniferous lumber measuring 10.2 cm x 20.3 cm, with a minimum dimension of 10.2 cm. Sliced lengthwise from coniferous logs to a thickness exceeding 6 mm, this lumber is used for construction framing and is not planed, sanded, or end-jointed, qualifying under tariff item 4407.19.00.
Douglas-Fir 5x6 Rough Sawn Studs
Douglas-Fir 5x6 Rough Sawn Studs are rough-sawn, untreated coniferous studs measuring 12.7 cm x 15.2 cm, with a minimum dimension of 12.7 cm. Sawn lengthwise to a thickness exceeding 6 mm, these studs are used for wall framing and are not planed, sanded, or end-jointed, falling under tariff item 4407.19.00.