Vanadium-Alloy Step Drill Bit 1-1/8 to 1-3/4 Inch
Multi-step drill bit progressing from 1-1/8 to 1-3/4 inches, made with HSS containing over 0.1% vanadium for unibit hole enlargement in sheet metal. For use in power tools. HTS 8207.50.20 due to vanadium threshold in cutting part.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported as tool parts only
Base metal parts without cutting edges have separate provisions.
If without vanadium or other high alloys
Standard HSS step bits without specified elements go to general category.
If for specific CNC machine-tools
Tools identified for particular Chapter 84 machines classify there.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Detail step sizes and max thickness capacity in commercial docs
• Vanadium content proof via mill certs essential for this specific threshold
• Check for deburring edges; may affect if seen as multi-function tool
Related Products under HTS 8207.50.20
High-Speed Steel Twist Drill Bit 1/4 Inch
A 1/4-inch diameter twist drill bit made from high-speed steel alloy containing over 0.2% chromium and 0.1% vanadium for enhanced hardness and heat resistance. Designed for interchangeable use in hand drills or machine tools for precise metal drilling. Falls under HTS 8207.50.20 due to its alloy composition in the cutting part meeting the specified elemental thresholds.
M42 Cobalt HSS Jobber Drill Bit Set 10-Piece
A set of 10 jobber-length drill bits from M42 cobalt high-speed steel with over 0.2% molybdenum and 0.1% vanadium for drilling tough materials like stainless steel. Interchangeable for power handtools or lathes. Classified in HTS 8207.50.20 based on the high-alloy cutting edges.
Carbide-Tipped Masonry Drill Bit 3/8 Inch
A 3/8-inch drill bit with tungsten carbide tip containing over 0.2% tungsten, mounted on high-speed steel body for drilling concrete and brick. Suitable for hammer drills and machine tools. HTS 8207.50.20 applies to the alloyed cutting part composition.
HSS Countersink Bit 82 Degree 1/2 Inch
82-degree high-speed steel countersink bit with 1/2-inch diameter, alloyed with over 0.2% chromium for chamfering screw holes in metal. Interchangeable for drill presses or handtools. Meets HTS 8207.50.20 criteria via cutting edge metallurgy.
Molybdenum HSS Core Drill Bit 1 Inch
1-inch annular core drill bit from HSS with over 0.2% molybdenum for cutting circular grooves in metal pipes and plates. Interchangeable for magnetic drills. Classified under HTS 8207.50.20 for alloyed cutting teeth.
Tungsten-Carbide Insert End Mill for Drilling 1/2 Inch
1/2-inch end mill with tungsten carbide inserts containing over 0.2% tungsten, usable for drilling and milling in CNC machines. High-alloy cutting edges for ferrous metals. HTS 8207.50.20 based on insert composition.