Carbide-Tipped Masonry Drill Bit 3/8 Inch
A 3/8-inch drill bit with tungsten carbide tip containing over 0.2% tungsten, mounted on high-speed steel body for drilling concrete and brick. Suitable for hammer drills and machine tools. HTS 8207.50.20 applies to the alloyed cutting part composition.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If designed for rock drilling
Earth/rock boring tools have separate provisions outside non-rock drilling subheadings.
If body and tip both low-alloy
Only the cutting part counts; low-alloy full tools go to the residual subheading.
If primarily millstones or natural abrasives
Pure grinding/abrading tools shift to Chapter 68, not Chapter 82.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify if tip is integral carbide or insert; composition testing may be required for tungsten content
• Differentiate from rock drilling tools by end-use documentation (masonry vs geological)
• Label with max RPM and material compatibility to aid customs verification
Related Products under HTS 8207.50.20
High-Speed Steel Twist Drill Bit 1/4 Inch
A 1/4-inch diameter twist drill bit made from high-speed steel alloy containing over 0.2% chromium and 0.1% vanadium for enhanced hardness and heat resistance. Designed for interchangeable use in hand drills or machine tools for precise metal drilling. Falls under HTS 8207.50.20 due to its alloy composition in the cutting part meeting the specified elemental thresholds.
M42 Cobalt HSS Jobber Drill Bit Set 10-Piece
A set of 10 jobber-length drill bits from M42 cobalt high-speed steel with over 0.2% molybdenum and 0.1% vanadium for drilling tough materials like stainless steel. Interchangeable for power handtools or lathes. Classified in HTS 8207.50.20 based on the high-alloy cutting edges.
HSS Countersink Bit 82 Degree 1/2 Inch
82-degree high-speed steel countersink bit with 1/2-inch diameter, alloyed with over 0.2% chromium for chamfering screw holes in metal. Interchangeable for drill presses or handtools. Meets HTS 8207.50.20 criteria via cutting edge metallurgy.
Vanadium-Alloy Step Drill Bit 1-1/8 to 1-3/4 Inch
Multi-step drill bit progressing from 1-1/8 to 1-3/4 inches, made with HSS containing over 0.1% vanadium for unibit hole enlargement in sheet metal. For use in power tools. HTS 8207.50.20 due to vanadium threshold in cutting part.
Molybdenum HSS Core Drill Bit 1 Inch
1-inch annular core drill bit from HSS with over 0.2% molybdenum for cutting circular grooves in metal pipes and plates. Interchangeable for magnetic drills. Classified under HTS 8207.50.20 for alloyed cutting teeth.
Tungsten-Carbide Insert End Mill for Drilling 1/2 Inch
1/2-inch end mill with tungsten carbide inserts containing over 0.2% tungsten, usable for drilling and milling in CNC machines. High-alloy cutting edges for ferrous metals. HTS 8207.50.20 based on insert composition.