Tin-18% Lead Bearing Alloy Anode
Unwrought anode form of tin-lead alloy for electroplating bearing surfaces in automotive applications. HTS 8001.20.00.50 for unwrought tin alloys specifically with lead 5-25% by weight.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If antimony or bismuth predominates
Other base metal alloys shift if tin not principal element.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mark as 'anodes for electroplating' to distinguish from scrap anodes
• Plating bath compatibility certs aid customs but secondary to composition
Related Products under HTS 8001.20.00.50
Tin-10% Lead Solder Alloy Ingot
An unwrought tin alloy ingot containing 88% tin and 10% lead by weight, used primarily for manufacturing solder in electronics assembly. It falls under HTS 8001.20.00.50 because it is an unwrought tin alloy with lead content between 5% and 25% by weight, meeting the chapter definition where tin predominates and total other elements exceed 1%.
Tin-15% Lead Pewter Casting Ingot
Unwrought ingot of tin alloy with 15% lead, designed for melting and casting into pewter tableware and decorative items. Classified under HTS 8001.20.00.50 as a tin-predominant alloy (tin >50% by weight) with lead 5-25%, per chapter definitions distinguishing it from pure tin.
Tin-20% Lead Fusible Alloy Bar
Unwrought bar form of low-melt tin-lead alloy (tin 78%, lead 20%, minor others) used in fusible links for fire sprinklers and safety devices. HTS 8001.20.00.50 applies to this unwrought tin alloy where lead is 5-25% by weight and tin predominates over other elements.
Tin-8% Lead Babbitt Metal Ingot
Unwrought ingot for Babbitt bearing alloy with 8% lead and balance tin plus minor antimony/copper, used in industrial bearings. Fits HTS 8001.20.00.50 as tin alloy (tin predominant) with lead 5-25%, per chapter note (b)(i) total other elements >1%.
Tin-12% Lead Cable Sheathing Alloy
Unwrought tin alloy pigs or anodes containing 12% lead for extrusion into protective cable sheathing in power transmission. Under HTS 8001.20.00.50 due to unwrought form, tin base (>50%), and lead content 5-25% meeting chapter alloy criteria.
Tin-22% Lead Organ Pipe Alloy Slab
Unwrought slab of high-lead tin alloy (78% tin, 22% lead) cast for melting into organ pipes and musical components. HTS 8001.20.00.50 captures unwrought tin alloys with lead precisely in 5-25% range, tin dominant.