Tin-15% Lead Pewter Casting Ingot
Unwrought ingot of tin alloy with 15% lead, designed for melting and casting into pewter tableware and decorative items. Classified under HTS 8001.20.00.50 as a tin-predominant alloy (tin >50% by weight) with lead 5-25%, per chapter definitions distinguishing it from pure tin.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If lead content exceeds 25% but tin still predominates
Higher lead alloys remain tin alloys under chapter note (b) but fall into different statistical suffix if over 25% lead.
If cast into finished statuettes, ornaments, or bells
Once processed into articles of base metal (not unwrought), they classify under Chapter 83 as finished goods.
If classified as tin waste or scrap with lead impurities
Unwrought material fitting scrap definitions (e.g., used alloys) shifts to Chapter 26 for metallurgical residues.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide chemical composition analysis from accredited lab to substantiate tin alloy status and lead percentage for CBP verification
• Label shipments clearly as 'unwrought tin alloy ingots' to prevent misclassification as finished pewter articles under Chapter 83
• Check for Proposition 65 warnings if importing to California due to lead content exceeding safe harbor levels
Related Products under HTS 8001.20.00.50
Tin-10% Lead Solder Alloy Ingot
An unwrought tin alloy ingot containing 88% tin and 10% lead by weight, used primarily for manufacturing solder in electronics assembly. It falls under HTS 8001.20.00.50 because it is an unwrought tin alloy with lead content between 5% and 25% by weight, meeting the chapter definition where tin predominates and total other elements exceed 1%.
Tin-20% Lead Fusible Alloy Bar
Unwrought bar form of low-melt tin-lead alloy (tin 78%, lead 20%, minor others) used in fusible links for fire sprinklers and safety devices. HTS 8001.20.00.50 applies to this unwrought tin alloy where lead is 5-25% by weight and tin predominates over other elements.
Tin-8% Lead Babbitt Metal Ingot
Unwrought ingot for Babbitt bearing alloy with 8% lead and balance tin plus minor antimony/copper, used in industrial bearings. Fits HTS 8001.20.00.50 as tin alloy (tin predominant) with lead 5-25%, per chapter note (b)(i) total other elements >1%.
Tin-12% Lead Cable Sheathing Alloy
Unwrought tin alloy pigs or anodes containing 12% lead for extrusion into protective cable sheathing in power transmission. Under HTS 8001.20.00.50 due to unwrought form, tin base (>50%), and lead content 5-25% meeting chapter alloy criteria.
Tin-22% Lead Organ Pipe Alloy Slab
Unwrought slab of high-lead tin alloy (78% tin, 22% lead) cast for melting into organ pipes and musical components. HTS 8001.20.00.50 captures unwrought tin alloys with lead precisely in 5-25% range, tin dominant.
Tin-6% Lead Type Metal Ingot
Unwrought ingot for traditional printing type metal alloy (tin 60%, lead 6%, antimony balance), though modern use declined. Classed in HTS 8001.20.00.50 for tin-dominant unwrought alloys with 5-25% lead per chapter specs.