</>Build with Tariff Intelligence|Programmatic access to tariff calculations and HS code classification.Explore Developer Resources →
Share:|Follow us on LinkedIn

Clad 5456 Aluminum Alloy Weldable Sheet

Clad 5456-H321 alloy sheet >0.2 mm for cryogenic tanks and shipbuilding, with cladding enhancing weldability. Thickness suits pressure containment. Clad alloy under 7606.92.60.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China6.5%+75.0%81.5%
🇲🇽Mexico6.5%+50.0%56.5%
🇨🇦Canada6.5%+50.0%56.5%
🇩🇪Germany6.5%+50.0%56.5%
🇯🇵Japan6.5%+50.0%56.5%

More Specific Codes

This product may fall under a more specific subheading:

7606.92.60.55With a thickness of more than 6.3 mm
→
7606.92.60.95With a thickness of 6.3 mm or less
→

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7309.00.00Lower: 75% vs 81.5%

If welded into reservoirs

Post-weld tanks become Chapter 73 containers.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Weld procedure specs aid classification defense

Related Products under HTS 7606.92.60

Clad Aluminum Alloy Heat Exchanger Plate

A clad aluminum alloy plate exceeding 0.2 mm thickness, featuring a core of 3003 alloy bonded to corrosion-resistant 4343 cladding on both sides. Used in automotive radiators and industrial heat exchangers for efficient heat transfer. Classified under 7606.92.60 as clad aluminum alloy plate/sheet.

Clad AA6061 Aluminum Alloy Pressure Vessel Sheet

Clad sheet of AA6061 aluminum alloy (Al-Mg-Si) over 0.2 mm thick, with corrosion-resistant cladding for chemical processing equipment. The cladding protects against harsh environments while maintaining structural strength. Fits 7606.92.60 as clad alloy plate/sheet.

Clad Aluminum Alloy Aircraft Skin Panel Sheet

High-strength clad 2024-T3 aluminum alloy sheet >0.2 mm thick, clad with pure Al for corrosion protection in fuselage skins. Essential for aerospace applications requiring fatigue resistance. Under 7606.92.60 for clad alloy sheets.

Clad 3003/4343 Aluminum Brazing Sheet

Clad brazing sheet with 3003 core and 4343 (Al-Si) cladding on one or both sides, thickness >0.2 mm, for evaporator coils in refrigeration. Enables vacuum brazing without flux. Classified as clad alloy plate under 7606.92.60.

Clad Aluminum Alloy Marine Grade Sheet

Clad 5083 aluminum alloy sheet >0.2 mm thick with Al-Zn cladding for boat hull plating and offshore platforms. Offers superior seawater corrosion resistance. HTS 7606.92.60 for clad alloys.

Clad AA7075 Aluminum Alloy Structural Sheet

High-strength AA7075-T6 clad sheet exceeding 0.2 mm, used in truck trailers and bridges for lightweight structures. Cladding prevents stress corrosion. Fits 7606.92.60 clad alloy plate.