Share:|Follow us on LinkedIn

Clad Aluminum Alloy Aircraft Skin Panel Sheet

High-strength clad 2024-T3 aluminum alloy sheet >0.2 mm thick, clad with pure Al for corrosion protection in fuselage skins. Essential for aerospace applications requiring fatigue resistance. Under 7606.92.60 for clad alloy sheets.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China6.5%+35.0%41.5%
🇲🇽Mexico6.5%+10.0%16.5%
🇨🇦Canada6.5%+10.0%16.5%
🇩🇪Germany6.5%+10.0%16.5%
🇯🇵Japan6.5%+10.0%16.5%

More Specific Codes

This product may fall under a more specific subheading:

7606.92.60.55With a thickness of more than 6.3 mm
→
7606.92.60.95With a thickness of 6.3 mm or less
→

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7606.92Same rate: 41.5%

If not rectangular (e.g., circles)

Non-rectangular alloy sheets fall outside .10/.60 into other alloy plates.

7605.21.00Lower: 37.6% vs 41.5%

If strip width <600mm

Narrower dimensions classify as strip rather than plate/sheet.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Obtain aerospace-grade certifications (e.g

• AMS specs) alongside HTS documentation

• Confirm no pre-drilled holes or contours; semi-finished sheets stay in 7606

• Alloy content must exceed note (a) limits for .92 classification

Related Products under HTS 7606.92.60

Clad Aluminum Alloy Heat Exchanger Plate

A clad aluminum alloy plate exceeding 0.2 mm thickness, featuring a core of 3003 alloy bonded to corrosion-resistant 4343 cladding on both sides. Used in automotive radiators and industrial heat exchangers for efficient heat transfer. Classified under 7606.92.60 as clad aluminum alloy plate/sheet.

Clad AA6061 Aluminum Alloy Pressure Vessel Sheet

Clad sheet of AA6061 aluminum alloy (Al-Mg-Si) over 0.2 mm thick, with corrosion-resistant cladding for chemical processing equipment. The cladding protects against harsh environments while maintaining structural strength. Fits 7606.92.60 as clad alloy plate/sheet.

Clad 3003/4343 Aluminum Brazing Sheet

Clad brazing sheet with 3003 core and 4343 (Al-Si) cladding on one or both sides, thickness >0.2 mm, for evaporator coils in refrigeration. Enables vacuum brazing without flux. Classified as clad alloy plate under 7606.92.60.

Clad Aluminum Alloy Marine Grade Sheet

Clad 5083 aluminum alloy sheet >0.2 mm thick with Al-Zn cladding for boat hull plating and offshore platforms. Offers superior seawater corrosion resistance. HTS 7606.92.60 for clad alloys.

Clad AA7075 Aluminum Alloy Structural Sheet

High-strength AA7075-T6 clad sheet exceeding 0.2 mm, used in truck trailers and bridges for lightweight structures. Cladding prevents stress corrosion. Fits 7606.92.60 clad alloy plate.

Clad Aluminum Fin Stock Sheet for Condensers

Clad aluminum alloy fin stock >0.2 mm thick with hydrophilic coating cladding for AC condenser fins. Improves heat dissipation and reduces water carryover. 7606.92.60 as clad plate.