Roll-Bonded Clad Aluminum Anode Plate
Clad non-alloyed aluminum plate thicker than 6.3 mm, roll-bonded for electrolytic anode use in metal finishing. High purity prevents contamination. Fits 7606.91.60.55: thick clad pure aluminum plate.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If classified as aluminum waste for remelting
High scrap content plates may go to unwrought waste Chapter 76.
If alloyed anode materials
Anode alloys with additives like Zn classify under alloy subheadings.
If made into carbon electrodes instead
Electrode end-use changes to Chapter 85 electrical carbon products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document roll-bonding process and interlayer diffusion analysis
• Confirm electrical conductivity specs meet anode requirements
Related Products under HTS 7606.91.60.55
Clad 99.5% Pure Aluminum Pressure Vessel Plate
A thick clad plate made from non-alloyed aluminum (over 99% pure) with a protective layer on one or both sides, exceeding 6.3 mm thickness. Used in fabricating high-pressure vessels for industrial applications. Classified under 7606.91.60.55 due to its non-alloyed composition, cladding, and specified thickness.
Clad Aluminum Heavy Structural Beam Blank Plate
Non-alloyed aluminum plate over 6.3 mm with cladding, used as blank for extruding structural beams. Provides base for lightweight construction. Classified 7606.91.60.55 for non-alloyed clad thickness.
Clad Non-Alloyed Aluminum Shipbuilding Plate
Heavy-duty clad plate from high-purity non-alloyed aluminum, thicker than 6.3 mm, designed for marine hull and deck construction. The cladding enhances corrosion resistance in saltwater environments. Fits 7606.91.60.55 as clad, non-alloyed aluminum plate exceeding the thickness threshold.
Bonded Clad Aluminum Heat Exchanger Plate
Clad non-alloyed aluminum plate over 6.3 mm thick, bonded with dissimilar metal layers for thermal efficiency in heat exchangers. High purity base ensures excellent conductivity. Classified in 7606.91.60.55 for its non-alloyed core, cladding, and heavy gauge.
Clad Pure Aluminum Bridge Deck Plating
Extra-thick (>6.3 mm) clad plate of non-alloyed aluminum for bridge decking and structural overlays. Cladding provides wear and weather resistance. Meets 7606.91.60.55 criteria: non-alloyed, clad, thick plate.
Explosion-Bonded Clad Aluminum Reactor Plate
Heavy gauge clad non-alloyed aluminum plate (>6.3 mm) using explosion bonding for chemical reactor lining. Pure aluminum core with steel cladding for durability. HTS 7606.91.60.55 applies to this thick, clad, non-alloyed plate.