Clad Pure Aluminum Bridge Deck Plating
Extra-thick (>6.3 mm) clad plate of non-alloyed aluminum for bridge decking and structural overlays. Cladding provides wear and weather resistance. Meets 7606.91.60.55 criteria: non-alloyed, clad, thick plate.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If in coil form rather than flat plate
Plates/sheets in coils under 0.2 mm thick shift to 7604 for non-alloyed.
If pre-fabricated into bridge sections
Assembled structures classify under Chapter 73 as metal structures.
If of aluminum alloys for same use
Alloyed bridge plates use 7606.92 due to material composition per notes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify structural grade compliance with ASTM B209 standards in documentation
• Document cladding thickness separately from base plate to affirm classification
Related Products under HTS 7606.91.60.55
Clad 99.5% Pure Aluminum Pressure Vessel Plate
A thick clad plate made from non-alloyed aluminum (over 99% pure) with a protective layer on one or both sides, exceeding 6.3 mm thickness. Used in fabricating high-pressure vessels for industrial applications. Classified under 7606.91.60.55 due to its non-alloyed composition, cladding, and specified thickness.
Clad Aluminum Heavy Structural Beam Blank Plate
Non-alloyed aluminum plate over 6.3 mm with cladding, used as blank for extruding structural beams. Provides base for lightweight construction. Classified 7606.91.60.55 for non-alloyed clad thickness.
Clad Non-Alloyed Aluminum Shipbuilding Plate
Heavy-duty clad plate from high-purity non-alloyed aluminum, thicker than 6.3 mm, designed for marine hull and deck construction. The cladding enhances corrosion resistance in saltwater environments. Fits 7606.91.60.55 as clad, non-alloyed aluminum plate exceeding the thickness threshold.
Bonded Clad Aluminum Heat Exchanger Plate
Clad non-alloyed aluminum plate over 6.3 mm thick, bonded with dissimilar metal layers for thermal efficiency in heat exchangers. High purity base ensures excellent conductivity. Classified in 7606.91.60.55 for its non-alloyed core, cladding, and heavy gauge.
Explosion-Bonded Clad Aluminum Reactor Plate
Heavy gauge clad non-alloyed aluminum plate (>6.3 mm) using explosion bonding for chemical reactor lining. Pure aluminum core with steel cladding for durability. HTS 7606.91.60.55 applies to this thick, clad, non-alloyed plate.
Clad Non-Alloyed Aluminum Cryogenic Tank Plate
Thick clad plate (>6.3 mm) from 99%+ pure aluminum for LNG cryogenic storage tanks. Cladding improves low-temp performance. Classified under 7606.91.60.55 for non-alloyed, clad, heavy thickness.