Clad Pure Aluminum Heavy-Duty Trailer Floor Plate
Non-alloyed aluminum plate over 6.3 mm thick with cladding for abrasion-resistant trailer flooring. Pure base offers lightweight strength. HTS 7606.91.60.55 for thick, clad, non-alloyed plate.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-formed into trailer body panels
Vehicle body parts shift to Chapter 87 automotive classification.
If non-clad floor plate version
Without cladding, uses basic non-alloyed plate subheading.
If strength-enhanced alloy alternative
Trailer alloys like 6061 exceed non-alloyed purity thresholds.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide tread pattern and skid resistance certifications
• Exact thickness caliper measurements required for entry
Related Products under HTS 7606.91.60.55
Clad 99.5% Pure Aluminum Pressure Vessel Plate
A thick clad plate made from non-alloyed aluminum (over 99% pure) with a protective layer on one or both sides, exceeding 6.3 mm thickness. Used in fabricating high-pressure vessels for industrial applications. Classified under 7606.91.60.55 due to its non-alloyed composition, cladding, and specified thickness.
Clad Aluminum Heavy Structural Beam Blank Plate
Non-alloyed aluminum plate over 6.3 mm with cladding, used as blank for extruding structural beams. Provides base for lightweight construction. Classified 7606.91.60.55 for non-alloyed clad thickness.
Clad Non-Alloyed Aluminum Shipbuilding Plate
Heavy-duty clad plate from high-purity non-alloyed aluminum, thicker than 6.3 mm, designed for marine hull and deck construction. The cladding enhances corrosion resistance in saltwater environments. Fits 7606.91.60.55 as clad, non-alloyed aluminum plate exceeding the thickness threshold.
Bonded Clad Aluminum Heat Exchanger Plate
Clad non-alloyed aluminum plate over 6.3 mm thick, bonded with dissimilar metal layers for thermal efficiency in heat exchangers. High purity base ensures excellent conductivity. Classified in 7606.91.60.55 for its non-alloyed core, cladding, and heavy gauge.
Clad Pure Aluminum Bridge Deck Plating
Extra-thick (>6.3 mm) clad plate of non-alloyed aluminum for bridge decking and structural overlays. Cladding provides wear and weather resistance. Meets 7606.91.60.55 criteria: non-alloyed, clad, thick plate.
Explosion-Bonded Clad Aluminum Reactor Plate
Heavy gauge clad non-alloyed aluminum plate (>6.3 mm) using explosion bonding for chemical reactor lining. Pure aluminum core with steel cladding for durability. HTS 7606.91.60.55 applies to this thick, clad, non-alloyed plate.