2024-T351 Aluminum Alloy Strip
High-strength 2024-T351 aluminum alloy strip plate, 7 mm thick, rectangular, for aircraft skin and frames. Classified in 7606.12.3035 for unclad alloy rectangular plates/strips >6.3 mm thick, meeting alloy impurity limits.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If unalloyed version of similar product
Shifts to non-alloy if aluminum purity exceeds 99% without alloying elements.
If thickness reduced to ≤0.2 mm after import
Thin foil or strip under 0.2 mm moves to heading 7607.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• FAA or EASA documentation may be required for aviation use; ensure flatness tolerances meet specs; avoid misdeclaration as thinner strip under different duties
Related Products under HTS 7606.12.30.35
6082-T6 Aluminum Alloy Bridge Deck Plate
6082-T6 aluminum alloy plate, 9 mm thick, rectangular, used in bridge decking and structural walkways. Under HTS 7606.12.3035 for 'other' unclad alloy plates exceeding 6.3 mm thickness.
5005-H32 Aluminum Alloy Tread Plate
5005-H32 aluminum alloy tread plate with raised pattern, 8 mm thick base, rectangular. Classifies in HTS 7606.12.3035 as unclad alloy plate >6.3 mm, pattern considered surface feature not changing form.
Alcoa 5182 Alloy Can End Stock Plate
5182 aluminum alloy plate stock, 7.5 mm thick, rectangular coils cut to plate for beverage can ends. HTS 7606.12.3035 for thick unclad alloy plates, used in container manufacturing.
7175 Aluminum Alloy Heat-Treated Plate
7175 aluminum alloy heat-treated plate, 20 mm thick, rectangular, for high-stress forgings. Covered by HTS 7606.12.3035 as 'other' thick unclad alloy plates meeting subheading alloy definitions.
7075-T6 Aluminum Alloy Plate
A high-strength 7075-T6 aluminum alloy plate with thickness of 8 mm, rectangular shape, used in aerospace structural components. Classified under HTS 7606.12.3035 as it is an unclad aluminum alloy plate exceeding 0.2 mm and specifically more than 6.3 mm thick. Meets alloy definition with aluminum predominating and other elements like zinc exceeding specified limits.
6061-T651 Aluminum Alloy Sheet
Rectangular 6061-T651 aluminum alloy sheet, 10 mm thick, commonly used for structural fabrication in machinery. Falls under HTS 7606.12.3035 due to alloy composition (magnesium and silicon predominant), unclad, thickness >6.3 mm, and rectangular form exceeding 0.2 mm.