7075-T6 Aluminum Alloy Plate
A high-strength 7075-T6 aluminum alloy plate with thickness of 8 mm, rectangular shape, used in aerospace structural components. Classified under HTS 7606.12.3035 as it is an unclad aluminum alloy plate exceeding 0.2 mm and specifically more than 6.3 mm thick. Meets alloy definition with aluminum predominating and other elements like zinc exceeding specified limits.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made from unalloyed aluminum (99%+ pure)
Pure aluminum plates shift to 7606.11 as they do not meet alloy criteria where other elements exceed 1% total or iron/silicon limits.
If thickness is exactly 6.3 mm or less but over 0.2 mm
Thinner plates in the same alloy and form fall under the subheading for thicknesses not exceeding 6.3 mm.
If further processed into finished articles like tool plates
Once machined or fabricated into specific end-use items, it moves from Chapter 76 semi-finished to other articles of aluminum.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying alloy composition and T6 temper; ensure thickness measured per ASTM standards to avoid reclassification; watch for anti-dumping duties on certain alloy plates from specific countries
Related Products under HTS 7606.12.30.35
6082-T6 Aluminum Alloy Bridge Deck Plate
6082-T6 aluminum alloy plate, 9 mm thick, rectangular, used in bridge decking and structural walkways. Under HTS 7606.12.3035 for 'other' unclad alloy plates exceeding 6.3 mm thickness.
5005-H32 Aluminum Alloy Tread Plate
5005-H32 aluminum alloy tread plate with raised pattern, 8 mm thick base, rectangular. Classifies in HTS 7606.12.3035 as unclad alloy plate >6.3 mm, pattern considered surface feature not changing form.
Alcoa 5182 Alloy Can End Stock Plate
5182 aluminum alloy plate stock, 7.5 mm thick, rectangular coils cut to plate for beverage can ends. HTS 7606.12.3035 for thick unclad alloy plates, used in container manufacturing.
7175 Aluminum Alloy Heat-Treated Plate
7175 aluminum alloy heat-treated plate, 20 mm thick, rectangular, for high-stress forgings. Covered by HTS 7606.12.3035 as 'other' thick unclad alloy plates meeting subheading alloy definitions.
6061-T651 Aluminum Alloy Sheet
Rectangular 6061-T651 aluminum alloy sheet, 10 mm thick, commonly used for structural fabrication in machinery. Falls under HTS 7606.12.3035 due to alloy composition (magnesium and silicon predominant), unclad, thickness >6.3 mm, and rectangular form exceeding 0.2 mm.
5083-H116 Aluminum Alloy Plate
Marine-grade 5083-H116 aluminum alloy plate, 12 mm thick, rectangular, for shipbuilding and offshore platforms. HTS 7606.12.3035 applies as an unclad alloy plate >6.3 mm thick, with magnesium content defining it as alloy per chapter notes.