Monel 400 Cold-Formed Strip
Monel 400 cold-formed strip, a nickel-copper alloy used in marine engineering and chemical equipment due to its excellent corrosion resistance in seawater. Classified under HTS 7506.20.10.00 for cold-formed nickel alloy strips narrower than plates but wider than foil.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If copper content exceeds nickel, classifying as copper-nickel
Primary material determines chapter; high-copper alloys move to Chapter 74.
If electrolytically produced rather than cold-formed
Electrolytic nickel alloy products have separate provisions excluding mechanically worked items.
If for industrial strip use from alloy steel
Similar dimensions in alloy steel classify under Chapter 72 iron/steel provisions.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide evidence of cold-working process (temper designation, hardness tests) to distinguish from annealed products
• Check strip width (typically under 600mm) to avoid plate classification overlap
• Include origin certificates as nickel alloys often qualify for preferential tariff treatments
Related Products under HTS 7506.20.10.00
Inconel 625 Cold-Formed Sheet
Inconel 625 is a nickel-chromium-molybdenum alloy sheet cold-formed for high-temperature and corrosion-resistant applications in aerospace and chemical processing. It falls under HTS 7506.20.10.00 as a cold-formed nickel alloy plate or sheet, distinguished by its manufacturing process from hot-rolled equivalents.
Hastelloy C-276 Cold-Formed Plate
Hastelloy C-276 cold-formed plate, a nickel-molybdenum-chromium alloy plate for extreme corrosion environments like flue gas desulfurization systems. HTS 7506.20.10.00 covers its cold-formed state, providing superior strength over hot-rolled versions.
Incoloy 825 Cold-Formed Foil
Incoloy 825 cold-formed foil, thin nickel-iron-chromium alloy sheet under 0.15mm thick for heat exchanger fins and chemical processing liners. Falls under HTS 7506.20.10.00 as cold-formed nickel alloy foil, critical for thin-gauge applications.
Nickel 200 Cold-Formed Alloy Strip
Nickel 200 alloy strip cold-formed for food processing equipment and electrical components, offering purity and corrosion resistance. HTS 7506.20.10.00 applies to its cold-worked condition as a commercially pure nickel alloy product.
Alloy 20 Cold-Formed Sheet
Carbide 20 (Alloy 20) cold-formed sheet, austenitic nickel-iron-chromium alloy for sulfuric acid handling equipment. Classified HTS 7506.20.10.00 due to cold-forming process enhancing its formability and strength.
Inconel X-750 Cold-Formed Strip
Inconel X-750 precipitation-hardening nickel alloy strip cold-formed for turbine blades and springs in gas turbines. HTS 7506.20.10.00 covers its strip form and cold-worked condition essential for aerospace certification.