Incoloy 825 Cold-Formed Foil
Incoloy 825 cold-formed foil, thin nickel-iron-chromium alloy sheet under 0.15mm thick for heat exchanger fins and chemical processing liners. Falls under HTS 7506.20.10.00 as cold-formed nickel alloy foil, critical for thin-gauge applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds foil limit
Sheets/strips over 0.15mm thick use different statistical suffixes.
If aluminum content dominates material composition
Aluminum-nickel alloys primarily classify under Chapter 76 aluminum provisions.
If when incorporated into electrical parts
Parts of electrical machinery take Chapter 85 classification over base material.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Measure thickness precisely (<0.15mm confirms foil; thicker becomes sheet/strip)
• Provide gauge tolerance certificates to validate cold-forming precision
• Declare surface finish (bright annealed vs. matte) as it affects allowable uses
Related Products under HTS 7506.20.10.00
Inconel 625 Cold-Formed Sheet
Inconel 625 is a nickel-chromium-molybdenum alloy sheet cold-formed for high-temperature and corrosion-resistant applications in aerospace and chemical processing. It falls under HTS 7506.20.10.00 as a cold-formed nickel alloy plate or sheet, distinguished by its manufacturing process from hot-rolled equivalents.
Monel 400 Cold-Formed Strip
Monel 400 cold-formed strip, a nickel-copper alloy used in marine engineering and chemical equipment due to its excellent corrosion resistance in seawater. Classified under HTS 7506.20.10.00 for cold-formed nickel alloy strips narrower than plates but wider than foil.
Hastelloy C-276 Cold-Formed Plate
Hastelloy C-276 cold-formed plate, a nickel-molybdenum-chromium alloy plate for extreme corrosion environments like flue gas desulfurization systems. HTS 7506.20.10.00 covers its cold-formed state, providing superior strength over hot-rolled versions.
Nickel 200 Cold-Formed Alloy Strip
Nickel 200 alloy strip cold-formed for food processing equipment and electrical components, offering purity and corrosion resistance. HTS 7506.20.10.00 applies to its cold-worked condition as a commercially pure nickel alloy product.
Alloy 20 Cold-Formed Sheet
Carbide 20 (Alloy 20) cold-formed sheet, austenitic nickel-iron-chromium alloy for sulfuric acid handling equipment. Classified HTS 7506.20.10.00 due to cold-forming process enhancing its formability and strength.
Inconel X-750 Cold-Formed Strip
Inconel X-750 precipitation-hardening nickel alloy strip cold-formed for turbine blades and springs in gas turbines. HTS 7506.20.10.00 covers its strip form and cold-worked condition essential for aerospace certification.