Yellow Brass Foil 0.13mm
Yellow brass (65/35 Cu-Zn) foil 0.13mm thick for musical instrument valves and decorative embossing. Unbacked copper-zinc alloy foil ≤0.15mm HTS 7410.12.00. Standard decorative brass composition.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 1% | +35.0% | 36% |
| 🇲🇽Mexico | 1% | +10.0% | 11% |
| 🇨🇦Canada | 1% | +10.0% | 11% |
| 🇩🇪Germany | 1% | +10.0% | 11% |
| 🇯🇵Japan | 1% | +10.0% | 11% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If parts of brass instruments
Fabricated musical instrument parts classified in Chapter 92.
If imitation jewelry findings
Jewelry components move to Chapter 71 regardless of material.
If adhesive backed for application
Self-adhesive backing changes to 'backed' subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Musical instrument manufacturers require specific temper (hardness) documentation
• Color consistency critical for decorative applications; specify finish type
• Rolled edge foils risk strip classification if gauge variation exceeds tolerance
Related Products under HTS 7410.12.00
Bronze Foil 0.08mm Sheet
Ultra-thin bronze foil (copper-tin alloy) at 0.08mm thickness, ideal for electrical shielding and artistic inlays. Falls under HTS 7410.12.00 as unbacked copper alloy foil ≤0.15mm. Bronze defined by tin predominating over other elements (zinc <10% if present).
Phosphor Bronze Foil 0.03mm
High-performance phosphor bronze foil (Cu-Sn-P alloy) 0.03mm thick for electrical contacts and springs. Classifies in HTS 7410.12.00 as unbacked copper alloy foil ≤0.15mm. Phosphorus trace element doesn't affect tin-dominant bronze definition.
Naval Brass Foil 0.07mm
Naval brass (Cu-Zn-Sn-Mn) foil 0.07mm thick optimized for seawater resistance in propeller shafts. Classifies HTS 7410.12.00 as unbacked copper-zinc base alloy foil ≤0.15mm. Low tin (<3%) maintains brass status.
Red Brass Foil 0.04mm
Red brass (85/15 Cu-Zn) ultra-thin foil 0.04mm for flexible connectors and heat shields. HTS 7410.12.00 unbacked copper alloy foil ≤0.15mm. High copper content brass alloy.
Brass Foil 0.10mm Thickness
Thin brass foil, a copper-zinc alloy foil with 0.10mm thickness excluding backing, used in precision gaskets and decorative laminates. Classified under HTS 7410.12.00 as unbacked copper alloy foil not exceeding 0.15mm thick. Meets brass definition where zinc predominates over other elements.
Nickel Silver Foil 0.12mm
Copper-nickel-zinc alloy foil (nickel silver) with 0.12mm thickness for instrument manufacturing and decorative stamping. HTS 7410.12.00 covers unbacked copper alloy foils ≤0.15mm thick. Qualifies as nickel silver with nickel ≥5% by weight.