Nickel Silver Foil 0.12mm
Copper-nickel-zinc alloy foil (nickel silver) with 0.12mm thickness for instrument manufacturing and decorative stamping. HTS 7410.12.00 covers unbacked copper alloy foils ≤0.15mm thick. Qualifies as nickel silver with nickel ≥5% by weight.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If printed
Printed copper alloy foils (regardless of backing) classified separately in 7410.14.00.
If copper-nickel-zinc strip >0.15mm thick
Thicker forms of same alloy go to 7409.99; 7410 limited to thin foils.
If reverts to refined copper composition
Lacks required nickel ≥5% threshold for nickel silver alloy definition.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• ,Document exact thickness measurement method per ASTM standards to avoid disputes
Related Products under HTS 7410.12.00
Bronze Foil 0.08mm Sheet
Ultra-thin bronze foil (copper-tin alloy) at 0.08mm thickness, ideal for electrical shielding and artistic inlays. Falls under HTS 7410.12.00 as unbacked copper alloy foil ≤0.15mm. Bronze defined by tin predominating over other elements (zinc <10% if present).
Phosphor Bronze Foil 0.03mm
High-performance phosphor bronze foil (Cu-Sn-P alloy) 0.03mm thick for electrical contacts and springs. Classifies in HTS 7410.12.00 as unbacked copper alloy foil ≤0.15mm. Phosphorus trace element doesn't affect tin-dominant bronze definition.
Naval Brass Foil 0.07mm
Naval brass (Cu-Zn-Sn-Mn) foil 0.07mm thick optimized for seawater resistance in propeller shafts. Classifies HTS 7410.12.00 as unbacked copper-zinc base alloy foil ≤0.15mm. Low tin (<3%) maintains brass status.
Red Brass Foil 0.04mm
Red brass (85/15 Cu-Zn) ultra-thin foil 0.04mm for flexible connectors and heat shields. HTS 7410.12.00 unbacked copper alloy foil ≤0.15mm. High copper content brass alloy.
Yellow Brass Foil 0.13mm
Yellow brass (65/35 Cu-Zn) foil 0.13mm thick for musical instrument valves and decorative embossing. Unbacked copper-zinc alloy foil ≤0.15mm HTS 7410.12.00. Standard decorative brass composition.
Brass Foil 0.10mm Thickness
Thin brass foil, a copper-zinc alloy foil with 0.10mm thickness excluding backing, used in precision gaskets and decorative laminates. Classified under HTS 7410.12.00 as unbacked copper alloy foil not exceeding 0.15mm thick. Meets brass definition where zinc predominates over other elements.