C11000 ETP Copper Alloy Strip
C11000 electrolytic tough pitch copper alloy strip contains trace phosphorus, thickness 0.25mm, width 610mm, used for busbars and electrical panels. Classified under HTS 7409.90.50.60 as 'other' copper alloy sheet/strip meeting width/thickness criteria, even though primarily copper with minimal alloying.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If certified as refined copper without alloy elements
Sheets/strips of commercially pure copper (no intentional alloying) go to refined copper heading
If phosphor bronze alloy per note (b)
Copper-tin alloys with tin predominant classify under specific bronze subheading
If processed into finished articles
Fabricated copper alloy products (not raw sheet/strip) move to Chapter 74 articles
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis confirming alloy status beyond pure copper; measure width precisely as CBP often verifies coil dimensions; use proper packaging to prevent edge damage affecting width classification
Related Products under HTS 7409.90.50.60
C26000 Cartridge Brass Sheet
C26000 cartridge brass sheet is a copper-zinc alloy plate with 30% zinc content, thickness 0.3mm, width 600mm, used for architectural flashing and radiator components. It falls under HTS 7409.90.50.60 as a copper alloy plate/sheet/strip exceeding 0.15mm thick but less than 5mm, over 500mm wide, not specifically provided for elsewhere. Meets subheading note (a) definition of brass with zinc predominant.
C44300 Admiralty Brass Plate
C44300 admiralty brass plate (70Cu-30Zn-1Sn) thickness 0.4mm, width 800mm, for condenser tubesheets and marine hardware. HTS 7409.90.50.60 applies as brass alloy per note (a) - zinc predominant, tin under 3%, in specified dimensions.
C70600 Copper-Nickel Sheet
C70600 90-10 copper-nickel sheet, thickness 0.5mm, width 1000mm, for seawater piping systems. Falls under HTS 7409.90.50.60 as 'other' copper alloy (nickel predominant over zinc if present, per note (d)), meeting physical dimension requirements.
C51000 Phosphor Bronze Strip
C51000 phosphor bronze strip (5% Sn, 0.12% P), thickness 0.2mm, width 550mm, for electrical connectors. HTS 7409.90.50.60 as 'other' copper alloy strip - tin predominant over other elements except permissible zinc.
C46400 Naval Brass Sheet
C46400 naval brass sheet (59Cu-40Zn-1Sn), 0.35mm thick, 700mm wide, for marine propellers and valve stems. Brass alloy per note (a), dimensions fit HTS 7409.90.50.60 perfectly.
C18200 Copper-Chromium Sheet
C18200 copper-chromium alloy sheet (0.8% Cr), 0.45mm thick, 650mm wide, for resistance welding electrodes. 'Other' copper alloy under HTS 7409.90.50.60 with chromium as alloying element.