Brass Shim Stock Sheet 0.5mm Thick 300mm Wide
Thin brass shim stock made from copper-zinc alloy, measuring 0.5mm thick and 300mm wide, used for precision spacing in machinery assembly. It falls under HTS 7409.29.00.90 as a copper-zinc base alloy (brass) plate/sheet exceeding 0.15mm thickness, under 5mm thick, and less than 500mm wide, not specified otherwise. Ideal for automotive and equipment maintenance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width 500mm or more
Brass sheets of same thickness but wider than 500mm classify under the broader width subheading in the same brass category.
If thickness ≤0.15mm
Thinner brass material becomes foil rather than plate/sheet, moving to Chapter 74 foil headings.
If further worked into shapes like circles or rectangles
Once cut, punched, or shaped beyond simple flat sheet, it becomes brass tube/pipe fittings or worked articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify alloy composition meets copper-zinc base alloy definition (zinc predominant, nickel <5%, tin <3%) with mill test certificates
• Ensure thickness >0.15mm but <5mm and width <500mm; measure precisely to avoid reclassification to wider strip categories
• Provide documentation on flat-rolled status vs. worked shapes to prevent shifts to Chapter 74 headings for profiles or foil
Related Products under HTS 7409.29.00.90
Brass Nameplate Blank 1mm Thick 200mm x 400mm
Unworked rectangular brass blanks for manufacturing nameplates and signs, 1mm thick and 400mm wide from copper-zinc alloy. Classified under HTS 7409.29.00.90 due to brass composition, thickness 0.15-5mm, and narrow width under 500mm, excluding specific forms. Commonly used in signage and equipment labeling.
Brass Patch Panel Sheet 0.8mm Thick 350mm Wide
Flat brass sheets for fabricating electrical patch panels and connectors, 0.8mm thick and 350mm wide, made from standard copper-zinc brass. Fits HTS 7409.29.00.90 as 'other' brass plates exceeding 0.15mm thickness, under 5mm, narrow width. Essential for telecom and networking hardware production.
Brass Gasket Material Sheet 2mm Thick 250mm Wide
Brass sheet stock for cutting industrial gaskets and seals, 2mm thick by 250mm wide, copper-zinc alloy. Under HTS 7409.29.00.90 for other brass plates/sheets >0.15mm thick, <5mm, <500mm wide. Used in automotive, plumbing, and machinery applications.
Brass Instrument Dial Blank 0.3mm Thick 150mm Wide
Thin brass blanks for watch and gauge dials, 0.3mm thick and 150mm wide strips from copper-zinc alloy. Classifies in HTS 7409.29.00.90 as other narrow brass sheets >0.15mm thick. Precision material for horology and measurement instruments.
Brass Electrical Bus Bar Strip 1.5mm Thick 400mm Wide
Brass strip for electrical bus bars and conductors, 1.5mm thick x 400mm wide, copper-zinc composition. HTS 7409.29.00.90 applies to this narrow brass sheet exceeding 0.15mm thickness. Used in power distribution panels.
Brass Lock Washer Blank 0.4mm Thick 280mm Wide
Sheet brass for stamping lock washers, 0.4mm thick and 280mm wide coil stock. Fits 'other' under HTS 7409.29.00.90 for brass plates <5mm thick, <500mm wide. Hardware manufacturing staple.