Brass Gasket Material Sheet 2mm Thick 250mm Wide
Brass sheet stock for cutting industrial gaskets and seals, 2mm thick by 250mm wide, copper-zinc alloy. Under HTS 7409.29.00.90 for other brass plates/sheets >0.15mm thick, <5mm, <500mm wide. Used in automotive, plumbing, and machinery applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of a thickness of 5 mm or more
Thicker brass plates have a separate subheading for dimensions ≥5mm.
If imported as finished gasket sets
Assembled gasket kits for machinery classify as parts of seals under Chapter 84.
If high tin content qualifying as bronze
Tin-dominant alloys per note (b) shift to bronze tube/pipe fittings if shaped accordingly.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Label clearly as flat sheet stock; pre-cut gaskets may classify as parts under Chapter 84/87/88
• Confirm zinc predominance in alloy certificate to distinguish from brasses vs. other alloys
• Measure coil width accurately; exceeding 500mm reclassifies even if cut post-import
Related Products under HTS 7409.29.00.90
Brass Shim Stock Sheet 0.5mm Thick 300mm Wide
Thin brass shim stock made from copper-zinc alloy, measuring 0.5mm thick and 300mm wide, used for precision spacing in machinery assembly. It falls under HTS 7409.29.00.90 as a copper-zinc base alloy (brass) plate/sheet exceeding 0.15mm thickness, under 5mm thick, and less than 500mm wide, not specified otherwise. Ideal for automotive and equipment maintenance.
Brass Nameplate Blank 1mm Thick 200mm x 400mm
Unworked rectangular brass blanks for manufacturing nameplates and signs, 1mm thick and 400mm wide from copper-zinc alloy. Classified under HTS 7409.29.00.90 due to brass composition, thickness 0.15-5mm, and narrow width under 500mm, excluding specific forms. Commonly used in signage and equipment labeling.
Brass Patch Panel Sheet 0.8mm Thick 350mm Wide
Flat brass sheets for fabricating electrical patch panels and connectors, 0.8mm thick and 350mm wide, made from standard copper-zinc brass. Fits HTS 7409.29.00.90 as 'other' brass plates exceeding 0.15mm thickness, under 5mm, narrow width. Essential for telecom and networking hardware production.
Brass Instrument Dial Blank 0.3mm Thick 150mm Wide
Thin brass blanks for watch and gauge dials, 0.3mm thick and 150mm wide strips from copper-zinc alloy. Classifies in HTS 7409.29.00.90 as other narrow brass sheets >0.15mm thick. Precision material for horology and measurement instruments.
Brass Electrical Bus Bar Strip 1.5mm Thick 400mm Wide
Brass strip for electrical bus bars and conductors, 1.5mm thick x 400mm wide, copper-zinc composition. HTS 7409.29.00.90 applies to this narrow brass sheet exceeding 0.15mm thickness. Used in power distribution panels.
Brass Lock Washer Blank 0.4mm Thick 280mm Wide
Sheet brass for stamping lock washers, 0.4mm thick and 280mm wide coil stock. Fits 'other' under HTS 7409.29.00.90 for brass plates <5mm thick, <500mm wide. Hardware manufacturing staple.