C93200 Bearing Bronze Wait No Brass Equivalent C83800 Leaded Red Brass Plate
Thick C83800 leaded red brass plate for bearings, zinc base.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If machined into plain bearings
Finished bearings classified as machinery parts.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Bearing end-use; not finished part
Related Products under HTS 7409.29.00.10
C86300 High-Lead Manganese Bronze Plate
This thick brass plate made from C86300 alloy, a copper-zinc base with manganese and lead additions, measures over 5 mm thick and is used for heavy-duty bearings and bushings. It falls under HTS 7409.29.00.10 because it is a copper-zinc base alloy (brass) plate exceeding 0.15 mm thickness, specifically in the 5 mm or more subcategory. The zinc predominates over other elements per subheading note (a), with low tin and nickel content.
C38500 Free-Cutting Brass Sheet 6mm Thick
A 6 mm thick sheet of C38500 free-cutting brass, containing copper, zinc, and lead for machinability, commonly used in architectural fittings and hardware. Classified under HTS 7409.29.00.10 as a copper-zinc base alloy (brass) plate/sheet/strip over 5 mm thick, with zinc predominant and tin under 3%.
C36000 Free-Machining Brass Plate 8mm
8 mm thick C36000 brass plate, a copper-zinc-lead alloy optimized for machining into fittings and valves. It qualifies for HTS 7409.29.00.10 due to its brass composition (zinc dominant, nickel <5%, tin <3%) and thickness exceeding 5 mm in plate form.
C46400 Naval Brass Thick Plate 5.5mm
5.5 mm C46400 naval brass plate, copper-zinc-tin alloy for marine hardware with corrosion resistance. Falls under 7409.29.00.10 as copper-zinc base (brass) since tin <3% and zinc predominates, in thickness 5 mm+ category.
C68000 Medium-Strength Brass Sheet 7mm
7 mm thick C68000 brass sheet with copper-zinc-manganese for structural fasteners. HTS 7409.29.00.10 applies as copper-zinc alloy plate >5 mm, manganese not affecting base classification per note (a).
CDA 377 Half-Hard Brass Plate 10mm
10 mm CDA 377 (C37700) half-hard brass plate for forging, copper-zinc-lead composition. Classified in 7409.29.00.10 for thick brass plates, zinc predominant.