Of a thickness of 5 mm or more
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: > Of copper-zinc base alloys (brass): > Other > Of a thickness of 5 mm or more
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Products classified under HTS 7409.29.00.10
C86300 High-Lead Manganese Bronze Plate
This thick brass plate made from C86300 alloy, a copper-zinc base with manganese and lead additions, measures over 5 mm thick and is used for heavy-duty bearings and bushings. It falls under HTS 7409.29.00.10 because it is a copper-zinc base alloy (brass) plate exceeding 0.15 mm thickness, specifically in the 5 mm or more subcategory. The zinc predominates over other elements per subheading note (a), with low tin and nickel content.
C38500 Free-Cutting Brass Sheet 6mm Thick
A 6 mm thick sheet of C38500 free-cutting brass, containing copper, zinc, and lead for machinability, commonly used in architectural fittings and hardware. Classified under HTS 7409.29.00.10 as a copper-zinc base alloy (brass) plate/sheet/strip over 5 mm thick, with zinc predominant and tin under 3%.
C36000 Free-Machining Brass Plate 8mm
8 mm thick C36000 brass plate, a copper-zinc-lead alloy optimized for machining into fittings and valves. It qualifies for HTS 7409.29.00.10 due to its brass composition (zinc dominant, nickel <5%, tin <3%) and thickness exceeding 5 mm in plate form.
C46400 Naval Brass Thick Plate 5.5mm
5.5 mm C46400 naval brass plate, copper-zinc-tin alloy for marine hardware with corrosion resistance. Falls under 7409.29.00.10 as copper-zinc base (brass) since tin <3% and zinc predominates, in thickness 5 mm+ category.
C68000 Medium-Strength Brass Sheet 7mm
7 mm thick C68000 brass sheet with copper-zinc-manganese for structural fasteners. HTS 7409.29.00.10 applies as copper-zinc alloy plate >5 mm, manganese not affecting base classification per note (a).
CDA 377 Half-Hard Brass Plate 10mm
10 mm CDA 377 (C37700) half-hard brass plate for forging, copper-zinc-lead composition. Classified in 7409.29.00.10 for thick brass plates, zinc predominant.
C35300 High-Leaded Brass Block 6mm Thick
6 mm sliced C35300 high-leaded brass for machining, qualifying as plate under 7409.29.00.10 due to brass alloy and thickness.
Admiralty Brass C44300 Plate 5mm+
5 mm+ Admiralty brass C44300 plate for heat exchangers, copper-zinc-tin but tin <3% keeping it brass per note.
C67400 Aluminum Brass Thick Sheet
Thick C67400 aluminum brass sheet >5mm for valves, zinc base with aluminum permitted.
C83600 Commercial Leaded Brass Plate
C83600 cast brass plate >5mm for bearings, machined from slab.
C84400 Leaded Red Brass 7mm Plate
7mm C84400 red brass plate, higher copper but zinc base.
C90200 Gilding Metal Brass Plate
Thick C90200 gilding brass >5mm for decorative trim.
C90500 Yellow Brass Thick Strip
5mm+ C90500 yellow brass strip/plate for hardware.
C90700 Semi-Red Brass Plate 9mm
9mm C90700 for valves, brass classified.
C93200 Bearing Bronze Wait No Brass Equivalent C83800 Leaded Red Brass Plate
Thick C83800 leaded red brass plate for bearings, zinc base.