C44300 Admiralty Brass Coil Stock
C44300 admiralty brass (71% Cu, 28% Zn, 1% Sn) coil, 1.5 mm thick, 490 mm wide, for heat exchangers. Fits 7409.21.00.75 exactly: thin brass coils <500 mm. Tin <3%, zinc dominant.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not in coils (sheets/plates)
Same thickness brass but cut sheets vs coils have different subheadings.
If made into tubes
Drawn/wound copper-zinc tubes classified by form, not strip.
If master alloys used in production
Semi-manufactured copper master alloys classified earlier in Chapter 74.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify deoxidized (DHP) condition if applicable; include corrosion test data; check country-of-melt for Section 232 steel/aluminum related restrictions
Related Products under HTS 7409.21.00.75
C46400 Naval Brass Coil Strip
Thin brass coil strip made from C46400 naval brass alloy (high zinc content with 1% tin), thickness 1.2 mm, width 400 mm, used for marine hardware. Classified under HTS 7409.21.00.75 as copper-zinc base alloy (brass) in coils, width <500 mm, thickness <1.6 mm but >0.15 mm. Meets subheading note (a) definition with zinc predominating and tin <3%.
C26000 Cartridge Brass Foil Coil
C26000 cartridge brass thin coil (30% zinc), 0.8 mm thick, 350 mm wide, for ammunition casings and precision stamping. Fits HTS 7409.21.00.75: brass in coils, <500 mm wide, <1.6 mm thick. Pure copper-zinc alloy per note (a).
C26800 Muntz Metal Brass Strip Coil
C26800 Muntz metal (yellow brass, 40% zinc) coil strip, 1.4 mm thick, 450 mm wide, for architectural trim and fittings. HTS 7409.21.00.75 applies: brass coils <5 mm thick, <500 mm wide, <1.6 mm. Zinc-dominant alloy without excess tin/nickel.
C28000 Muntz Metal Low-Lead Brass Coil
Low-lead C28000 brass coil (40% zinc), 1.0 mm thick, 380 mm wide, for plumbing components. Under 7409.21.00.75 as thin brass coil strip. Complies with brass definition (note a).
C36000 Free-Cutting Brass Strip Coil
C36000 free-machining brass (3% lead) thin coil, 0.6 mm x 420 mm wide, for screw machine products. HTS 7409.21.00.75: brass in narrow coils <1.6 mm thick. Zinc base alloy per note (a).
C23000 Red Brass Narrow Coil
C23000 red brass (15% zinc) strip coil, 1.3 mm x 300 mm wide, for decorative hardware. HTS 7409.21.00.75: low-zinc brass qualifying as copper-zinc base alloy coils.