C28000 Muntz Metal Low-Lead Brass Coil
Low-lead C28000 brass coil (40% zinc), 1.0 mm thick, 380 mm wide, for plumbing components. Under 7409.21.00.75 as thin brass coil strip. Complies with brass definition (note a).
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width ≥500 mm but <1500 mm
Wider coils classified in parallel width subheadings despite same thickness.
If imitation jewelry components
End-use as jewelry parts shifts to Chapter 71 classification.
If made into finished articles
Fabricated copper products (fittings, etc.) classified by function, not material form.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain NSF/ANSI 61 certification docs for lead-free claims; test for exact alloy composition; avoid misdeclaration as thicker gauge to dodge higher duties
Related Products under HTS 7409.21.00.75
C46400 Naval Brass Coil Strip
Thin brass coil strip made from C46400 naval brass alloy (high zinc content with 1% tin), thickness 1.2 mm, width 400 mm, used for marine hardware. Classified under HTS 7409.21.00.75 as copper-zinc base alloy (brass) in coils, width <500 mm, thickness <1.6 mm but >0.15 mm. Meets subheading note (a) definition with zinc predominating and tin <3%.
C26000 Cartridge Brass Foil Coil
C26000 cartridge brass thin coil (30% zinc), 0.8 mm thick, 350 mm wide, for ammunition casings and precision stamping. Fits HTS 7409.21.00.75: brass in coils, <500 mm wide, <1.6 mm thick. Pure copper-zinc alloy per note (a).
C26800 Muntz Metal Brass Strip Coil
C26800 Muntz metal (yellow brass, 40% zinc) coil strip, 1.4 mm thick, 450 mm wide, for architectural trim and fittings. HTS 7409.21.00.75 applies: brass coils <5 mm thick, <500 mm wide, <1.6 mm. Zinc-dominant alloy without excess tin/nickel.
C36000 Free-Cutting Brass Strip Coil
C36000 free-machining brass (3% lead) thin coil, 0.6 mm x 420 mm wide, for screw machine products. HTS 7409.21.00.75: brass in narrow coils <1.6 mm thick. Zinc base alloy per note (a).
C44300 Admiralty Brass Coil Stock
C44300 admiralty brass (71% Cu, 28% Zn, 1% Sn) coil, 1.5 mm thick, 490 mm wide, for heat exchangers. Fits 7409.21.00.75 exactly: thin brass coils <500 mm. Tin <3%, zinc dominant.
C23000 Red Brass Narrow Coil
C23000 red brass (15% zinc) strip coil, 1.3 mm x 300 mm wide, for decorative hardware. HTS 7409.21.00.75: low-zinc brass qualifying as copper-zinc base alloy coils.