Phosphor Bronze C51000 Ingot
C51000 phosphor bronze contains 94.8% copper, 5% tin, 0.2% phosphorus unwrought. HTS 7403.29.01 classification as other copper-tin alloy (bronze). Precision springs and electrical connectors primary uses.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If without phosphorus addition
Tin-zinc only would classify as brass if zinc present.
If rolled to phosphor bronze strip
Any flat-rolled product, even thin gauge, becomes 7408.
If deoxidizer master alloy
Phosphorus-copper specifically for deoxidizing in 7405.20.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Phosphorus content specification critical; affects spring temper properties
• Heat treat records demonstrate unwrought status pre-rolling
• Conductor alloy; electrical conductivity test data supports use declaration
Related Products under HTS 7403.29.01
CDA 932 Bearing Bronze Ingot
CDA 932 bearing bronze is a copper-tin alloy containing about 83% copper, 7% tin, and 7% zinc, cast into ingots for further processing. It falls under HTS 7403.29.01 as an unwrought copper-tin base alloy (bronze) that does not meet master alloy specifications. These ingots are melted down to produce bushings and bearings.
Leaded Red Brass C84400 Ingot
Leaded red brass C84400 is a copper alloy with approximately 81% copper, 4% tin, 12% zinc, and 3% lead, supplied as unwrought ingots. Classified under HTS 7403.29.01 as other copper alloys not fitting brass or nickel silver definitions due to tin presence. Used in plumbing fittings and valves.
Aluminum Bronze C95400 Ingot
C95400 aluminum bronze ingot contains 85% copper, 11% aluminum, 4% iron, and 3% nickel in unwrought form. It qualifies under HTS 7403.29.01 as other copper alloys since aluminum predominates over tin or nickel per subheading notes. Ideal for heavy-duty gears and marine propellers.
Silicon Bronze C65500 Ingot
Silicon bronze C65500 consists of 96% copper, 3% silicon, and 1% manganese in pig or ingot form, unwrought. Falls under HTS 7403.29.01 as other copper alloy not matching defined brasses or nickel silvers. Commonly used for weld rods and marine hardware.
Manganese Bronze C86500 Ingot
C86500 manganese bronze ingot is 58% copper, 39% zinc, 2% manganese, and aluminum, cast unwrought. Classified HTS 7403.29.01 as other copper alloy since it doesn't strictly fit brass definitions with multiple elements. Used for propeller shafts and gears.
Naval Brass C46400 Ingot
Naval brass C46400 contains 60% copper, 39% zinc, and 1% tin in unwrought ingot form. HTS 7403.29.01 applies as other copper alloy due to tin addition preventing pure brass classification. Essential for marine hardware and propeller shafts.