Aluminum Bronze C95400 Ingot
C95400 aluminum bronze ingot contains 85% copper, 11% aluminum, 4% iron, and 3% nickel in unwrought form. It qualifies under HTS 7403.29.01 as other copper alloys since aluminum predominates over tin or nickel per subheading notes. Ideal for heavy-duty gears and marine propellers.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If nickel content 5%+ with zinc
Qualifies as copper-nickel-zinc (nickel silver) per note (c) with sufficient nickel.
If supplied as powder or flakes
Powders of copper alloys, unwrought, move to heading 7406 regardless of composition.
If iron content predominates
Ferrous alloys with copper as minor element classify under Chapter 72.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit XRF spectrometry reports verifying copper base and aluminum as primary alloying element
• Mark ingots with CDA designation and heat numbers for traceability during customs exam
• Avoid shipping in mixed alloy lots; segregation prevents average composition disputes
Related Products under HTS 7403.29.01
CDA 932 Bearing Bronze Ingot
CDA 932 bearing bronze is a copper-tin alloy containing about 83% copper, 7% tin, and 7% zinc, cast into ingots for further processing. It falls under HTS 7403.29.01 as an unwrought copper-tin base alloy (bronze) that does not meet master alloy specifications. These ingots are melted down to produce bushings and bearings.
Leaded Red Brass C84400 Ingot
Leaded red brass C84400 is a copper alloy with approximately 81% copper, 4% tin, 12% zinc, and 3% lead, supplied as unwrought ingots. Classified under HTS 7403.29.01 as other copper alloys not fitting brass or nickel silver definitions due to tin presence. Used in plumbing fittings and valves.
Silicon Bronze C65500 Ingot
Silicon bronze C65500 consists of 96% copper, 3% silicon, and 1% manganese in pig or ingot form, unwrought. Falls under HTS 7403.29.01 as other copper alloy not matching defined brasses or nickel silvers. Commonly used for weld rods and marine hardware.
Manganese Bronze C86500 Ingot
C86500 manganese bronze ingot is 58% copper, 39% zinc, 2% manganese, and aluminum, cast unwrought. Classified HTS 7403.29.01 as other copper alloy since it doesn't strictly fit brass definitions with multiple elements. Used for propeller shafts and gears.
Naval Brass C46400 Ingot
Naval brass C46400 contains 60% copper, 39% zinc, and 1% tin in unwrought ingot form. HTS 7403.29.01 applies as other copper alloy due to tin addition preventing pure brass classification. Essential for marine hardware and propeller shafts.
Commercial Bronze C22000 Ingot
C22000 commercial bronze is 90% copper and 10% zinc unwrought ingot for architectural applications. Falls under HTS 7403.29.01 as other copper alloy, though low zinc. Used in sheet metal work and decorative trim.