Copper Cliff Anodes
Copper Cliff anodes are cast copper shapes produced from smelter matte, used directly in electrolytic tank houses for refining. Classified under HTS 7402.00.00.00 as copper anodes specifically for electrolytic refining. These anodes dissolve during electrolysis to deposit pure copper cathodes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If machined or straightened beyond crude cast form
Mechanically worked anodes lose crude unrefined status and become semi-manufactured under 7407.
If already electrolytically refined to cathode
Electrolytic copper cathodes are finished refined products under separate 7403 heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide tank house specifications confirming anode compatibility to validate electrolytic refining classification
• Maintain impurity analysis reports (As, Sb, Bi levels) as customs may test for refined copper misclassification
• Declare exact anode dimensions and weight; oversized castings might be scrutinized as semi-finished products
Related Products under HTS 7402.00.00.00
Black Copper Precipitate
Black copper precipitate is a low-grade unrefined copper produced by cementation from copper-bearing solutions, containing impurities like iron and sulfur. It falls under HTS 7402.00.00.00 as unrefined copper not suitable for direct use without further processing. This material is typically used as feed for fire refining processes.
Electrolytic Copper Starter Sheets
Thin stainless steel-backed copper sheets used to initiate cathode deposition in electrolytic refining cells. Under HTS 7402.00.00.00 as copper anodes for electrolytic refining when considering the deposited copper layer. These starter sheets become perpetual cathodes after initial deposition.
Fire-Refinery Anode Scrap
Scrap copper anodes returned from fire refining operations, containing 95-98% copper with slag inclusions. HTS 7402.00.00.00 covers this unrefined copper material destined for re-melting and electrolytic refining. Typically briquetted or as-is for furnace feed.
Cement Copper Nuggets
Nugget-form unrefined copper recovered by cementation from acidic mine drainage waters. Classifies under HTS 7402.00.00.00 as unrefined copper requiring smelting and electrolytic refining. Typical purity 60-80% copper with iron/silica impurities.
Anode Casting Wheel Scrap
Overflow and trim scrap from continuous anode casting wheels in copper smelters. HTS 7402.00.00.00 as unrefined copper anodes material returned to the casting circuit. Contains typical anode impurities (oxygen, sulfur) preventing refined classification.
Blister Copper Buttons
Small button-shaped castings of blister copper from fire refining, serving as test samples or furnace charge. Under HTS 7402.00.00.00 as unrefined copper ahead of electrolytic refining. Typical 98-99% Cu with gas porosity characteristic of blister form.