Stainless Steel Trellis Net Cable 4mm
4mm stainless steel cable for vineyard trellis netting systems. Falls under HTS 7312.10.6060 as stainless cordage for agricultural support. UV and chemical resistant for permanent outdoor installation.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If fitted specifically for agricultural machinery
Machinery-fitted ropes excluded from general provisions.
If synthetic twine for agricultural netting
Plastic netting cordage common in agriculture under Chapter 56.
If coil springs rather than straight cable
Spring construction for tension vs static cable support.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify trellis end-use to avoid agricultural machinery fitting confusion
• Soil/fertilizer chemical resistance test documentation
• Tension load calculations for row spacing configurations
Related Products under HTS 7312.10.60.60
1/4 Inch Stainless Steel Wire Rope
A 1/4 inch diameter stainless steel wire rope composed of multiple strands twisted together, used for rigging and lifting applications. It falls under HTS 7312.10.6060 as it is a rope of stainless steel, not electrically insulated, and not specifically fitted for other uses. The product meets the chapter definition of wire with cross-sections under 16 mm.
3/8 Inch 7x19 Stainless Steel Cable
A flexible 3/8 inch 7x19 construction stainless steel cable ideal for pulleys and winches in marine environments. Classified under HTS 7312.10.6060 as stainless steel cordage other than stranded wire. Its multi-strand lay provides strength without exceeding wire dimension limits.
Stainless Steel Rigging Sling 1/2 Inch
A 1/2 inch stainless steel wire rope sling with fitted thimbles for heavy-duty lifting. HTS 7312.10.6060 applies to this stainless steel rope not electrically insulated or fitted for special machinery. Domed ends prevent kinking during industrial use.
5/16 Inch Stainless Steel Coated Wire Rope
Corrosion-resistant 5/16 inch stainless steel wire rope with plastic coating for abrasion protection in outdoor applications. Falls under HTS 7312.10.6060 as stainless steel rope; coating is protective, not electrical insulation. Cross-section remains under 16 mm per chapter note.
Stainless Steel Guy Wire 3/16 Inch
3/16 inch EHS (extra high strength) stainless steel guy wire for antenna towers and structural support. Classified HTS 7312.10.6060 as stainless steel cable/ropes not insulated. 1x7 strand construction provides rigidity for tension applications.
1 Inch Stainless Steel Running Rigging Rope
1 inch diameter 6x36 IWRC stainless steel rope for yacht running rigging through blocks and pulleys. HTS 7312.10.6060 covers this flexible stainless cordage. Independent wire rope core enhances strength for marine hoisting.