Stainless Steel Guy Wire 3/16 Inch
3/16 inch EHS (extra high strength) stainless steel guy wire for antenna towers and structural support. Classified HTS 7312.10.6060 as stainless steel cable/ropes not insulated. 1x7 strand construction provides rigidity for tension applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If shaped for use in structures as reinforcing bars
Structural steel shapes/bars differ from rope/cable construction.
If presented as individual wire strands, not assembled rope
Unassembled wire vs fabricated rope changes classification level.
If carbon steel rather than stainless
Material composition (stainless vs other steel) determines subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide tensile strength certification (typically 7,000+ lbs breaking strength)
• Mark with 'guy strand' designation and alloy grade for proper identification
• Consider Section 232 steel tariffs; verify melt and pour certificates
Related Products under HTS 7312.10.60.60
1/4 Inch Stainless Steel Wire Rope
A 1/4 inch diameter stainless steel wire rope composed of multiple strands twisted together, used for rigging and lifting applications. It falls under HTS 7312.10.6060 as it is a rope of stainless steel, not electrically insulated, and not specifically fitted for other uses. The product meets the chapter definition of wire with cross-sections under 16 mm.
3/8 Inch 7x19 Stainless Steel Cable
A flexible 3/8 inch 7x19 construction stainless steel cable ideal for pulleys and winches in marine environments. Classified under HTS 7312.10.6060 as stainless steel cordage other than stranded wire. Its multi-strand lay provides strength without exceeding wire dimension limits.
Stainless Steel Rigging Sling 1/2 Inch
A 1/2 inch stainless steel wire rope sling with fitted thimbles for heavy-duty lifting. HTS 7312.10.6060 applies to this stainless steel rope not electrically insulated or fitted for special machinery. Domed ends prevent kinking during industrial use.
5/16 Inch Stainless Steel Coated Wire Rope
Corrosion-resistant 5/16 inch stainless steel wire rope with plastic coating for abrasion protection in outdoor applications. Falls under HTS 7312.10.6060 as stainless steel rope; coating is protective, not electrical insulation. Cross-section remains under 16 mm per chapter note.
1 Inch Stainless Steel Running Rigging Rope
1 inch diameter 6x36 IWRC stainless steel rope for yacht running rigging through blocks and pulleys. HTS 7312.10.6060 covers this flexible stainless cordage. Independent wire rope core enhances strength for marine hoisting.
Stainless Steel Balustrade Cable 1/8 Inch
1/8 inch 1x19 stainless steel cable for architectural balustrades and railings. Falls under HTS 7312.10.6060 as stainless steel cordage other than stranded wire. Swaged ends accept turnbuckles for tensioning in decorative applications.