Stainless Steel Winch Cable with Hook and Socket
Stranded stainless steel wire rope with poured socket termination and safety hook fitting for electric winch or hoist applications. HTS 7312.10.0500 covers this as stainless steel stranded wire made up into a fitted article. Cross-sectional dimension under 16 mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If bare cable spools without termination fittings
Lacks 'fitted with fittings' requirement for this subheading.
If imported pre-wound on winch drums
Machinery parts classification when supplied as complete winch cable assembly.
If bulk industrial rigging without specific end fittings
Other fabricated steel articles if not predominantly stranded wire construction.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include socket pouring specifications and NDT (non-destructive testing) certificates
• Mark safe working load (SWL) per fitting capacity
• Common error: classifying drum-wound assemblies under hoist parts 8431
Related Products under HTS 7312.10.05.00
Stainless Steel Wire Rope Sling with Eye Hooks
A pre-assembled lifting sling made from stranded stainless steel wire rope with fitted thimbled eye hooks at both ends for secure rigging. Classified under HTS 7312.10.0500 because it is stranded stainless steel wire fitted with fittings, designed for industrial lifting applications. The wire diameter does not exceed 16 mm, fitting Chapter 73 wire definition.
Stainless Steel Cable with Swage Fittings for Balustrades
Stranded stainless steel wire cable fitted with swage terminals and turnbuckles for tensioning in architectural balustrade systems. Falls under HTS 7312.10.0500 as it is made up into an article with integral fittings for structural support applications. Conforms to wire definition with cross-section under 16 mm.
Stainless Steel Guy Wire Assembly with Thimbles and Clamps
Pre-made stranded stainless steel guy wire fitted with thimbles, U-bolt clamps, and dead-end fittings for antenna or tower guying. HTS 7312.10.0500 applies as stranded stainless steel wire made up into a fitted article for tension support. Wire cross-section ≤16 mm per chapter note.
Stainless Steel Control Cable with Nicopress Fittings
Stranded stainless steel cable fitted with Nicopress oval sleeves and end loops for mechanical control applications like throttle or brake cables. Classified in 7312.10.0500 due to stainless steel stranding fitted with compression fittings forming a complete article. Meets wire dimension limits.
Stainless Steel Fence Wire Rope with Crimped Ends
Stranded stainless steel rope with aluminum crimped ferrules and eyelets for horizontal tension wire in security fencing systems. Fits HTS 7312.10.0500 as fitted stainless steel stranded wire article for perimeter security. Wire ≤16 mm per chapter definition.
Stainless Steel Paracord with Terminal Loops
7x19 stranded stainless steel paracord fitted with sewn or swaged terminal loops for tactical and rescue applications. Under HTS 7312.10.0500 as made-up stainless steel stranded wire article with end fittings. Conforms to wire cross-section limit.