Stainless Steel Cable with Swage Fittings for Balustrades
Stranded stainless steel wire cable fitted with swage terminals and turnbuckles for tensioning in architectural balustrade systems. Falls under HTS 7312.10.0500 as it is made up into an article with integral fittings for structural support applications. Conforms to wire definition with cross-section under 16 mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of base iron or steel, not stainless
Switches to non-stainless stranded wire subheading when material is not stainless steel.
If configured as structural tension members with specific profiles
Certain architectural wire assemblies may classify under structures and parts of structures of iron or steel.
If primarily aluminum stranding with steel fittings
Material composition shifts to aluminum chapter if predominant material changes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include engineering drawings showing fitting integration and tensile strength certifications
• Label for corrosion resistance suitable for outdoor use
• Avoid classifying as raw cable if fittings are crimped/swaged during manufacture
Related Products under HTS 7312.10.05.00
Stainless Steel Wire Rope Sling with Eye Hooks
A pre-assembled lifting sling made from stranded stainless steel wire rope with fitted thimbled eye hooks at both ends for secure rigging. Classified under HTS 7312.10.0500 because it is stranded stainless steel wire fitted with fittings, designed for industrial lifting applications. The wire diameter does not exceed 16 mm, fitting Chapter 73 wire definition.
Stainless Steel Guy Wire Assembly with Thimbles and Clamps
Pre-made stranded stainless steel guy wire fitted with thimbles, U-bolt clamps, and dead-end fittings for antenna or tower guying. HTS 7312.10.0500 applies as stranded stainless steel wire made up into a fitted article for tension support. Wire cross-section ≤16 mm per chapter note.
Stainless Steel Control Cable with Nicopress Fittings
Stranded stainless steel cable fitted with Nicopress oval sleeves and end loops for mechanical control applications like throttle or brake cables. Classified in 7312.10.0500 due to stainless steel stranding fitted with compression fittings forming a complete article. Meets wire dimension limits.
Stainless Steel Winch Cable with Hook and Socket
Stranded stainless steel wire rope with poured socket termination and safety hook fitting for electric winch or hoist applications. HTS 7312.10.0500 covers this as stainless steel stranded wire made up into a fitted article. Cross-sectional dimension under 16 mm.
Stainless Steel Fence Wire Rope with Crimped Ends
Stranded stainless steel rope with aluminum crimped ferrules and eyelets for horizontal tension wire in security fencing systems. Fits HTS 7312.10.0500 as fitted stainless steel stranded wire article for perimeter security. Wire ≤16 mm per chapter definition.
Stainless Steel Paracord with Terminal Loops
7x19 stranded stainless steel paracord fitted with sewn or swaged terminal loops for tactical and rescue applications. Under HTS 7312.10.0500 as made-up stainless steel stranded wire article with end fittings. Conforms to wire cross-section limit.