Oval Welded Steel Tube for Handrails 60x30mm
Welded oval hollow profile (60mm x 30mm) of nonalloy steel with 2.5 mm wall, designed for architectural handrails and balustrades. It qualifies for HTS 7306.69.5000 due to noncircular oval section, welded seam, and thin wall thickness under 4 mm. Excludes pressure-rated pipes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If seamless construction
Seamless oval tubes for mechanical use classify under 7304 as non-welded pipes, differing by production method.
If wall thickness over 4 mm
Thicker walls for higher load-bearing shift to 7306.69.70.00 or similar, based on structural specs.
If diameter exceeds 16 mm but used as wire-like
If cross-section dimensions all <=16 mm, may be considered 'wire' per Chapter 73 note, moving to Chapter 73 wire headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include engineering drawings showing cross-section to prove noncircular shape during customs exam
• Label with steel grade (e.g
• ASTM A500) and confirm nonalloy status to avoid alloy steel tariffs
Related Products under HTS 7306.69.50.00
Welded Rectangular Steel Tubing 2x1 Inch
This is a welded hollow profile of noncircular rectangular cross-section (2 inches by 1 inch) made from nonalloy steel with a wall thickness of 2 mm, used in structural frameworks for machinery guards. It falls under HTS 7306.69.5000 as it is a welded tube of iron or nonalloy steel with noncircular cross-section and wall thickness less than 4 mm. The open-seamed or welded construction distinguishes it from seamless pipes.
Elliptical Welded Iron Steel Profile 45x20mm
Welded elliptical hollow profile from iron or nonalloy steel (45mm major x 20mm minor axis) with 1.5 mm wall thickness, used in greenhouse frameworks. Classified in HTS 7306.69.5000 for noncircular ellipse, welded, and <4mm wall specs. Fits 'other tubes and hollow profiles'.
Rectangular Thin-Wall Steel Tube for Gym Equipment
Welded 40x20mm rectangular tube of nonalloy steel with 2 mm walls, tailored for fitness equipment frames like treadmill bases. HTS 7306.69.5000 due to noncircular rectangle, welded, thin wall. Excludes fitness machines themselves.
L-Shaped Welded Nonalloy Steel Profile 25x25x3mm
Welded L-shaped (angle) hollow profile of nonalloy steel (25mm legs x 3mm wall), for light structural supports in displays. Under HTS 7306.69.5000 as noncircular welded hollow profile <4mm thick. Angle counts as noncircular cross-section.
Square Nonalloy Steel Hollow Section 50x50mm
A welded square tube (50mm x 50mm cross-section) from nonalloy steel with 3 mm wall thickness, commonly used in furniture frames and shelving. Classified under HTS 7306.69.5000 for its welded construction, noncircular square profile, and thin wall. It meets the definition of 'other tubes, pipes and hollow profiles' excluding circular shapes.
D-Shaped Nonalloy Steel Tube 40x20mm
Welded D-shaped hollow tube of iron or nonalloy steel (40mm height x 20mm width) with 1.8 mm wall thickness, used in automotive trim and signage frames. Fits HTS 7306.69.5000 as a noncircular welded profile with thin walls. Distinct from standard square or rectangular sections.