L-Shaped Welded Nonalloy Steel Profile 25x25x3mm
Welded L-shaped (angle) hollow profile of nonalloy steel (25mm legs x 3mm wall), for light structural supports in displays. Under HTS 7306.69.5000 as noncircular welded hollow profile <4mm thick. Angle counts as noncircular cross-section.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If solid not hollow
Solid angles are Chapter 72 sections, not hollow tubes.
If for base metal mountings
Hardware end-use reclassifies under Chapter 83 fittings.
If for pressure vessel use
Boiler/pressure applications move to Chapter 73 structures.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Differentiate from solid angle bars in 7216; emphasize hollow interior
• Cut lengths under 3m easier for duty; longer may need special permits
• Avoid alloy claims without certs; nonalloy simpler duties
Related Products under HTS 7306.69.50.00
Welded Rectangular Steel Tubing 2x1 Inch
This is a welded hollow profile of noncircular rectangular cross-section (2 inches by 1 inch) made from nonalloy steel with a wall thickness of 2 mm, used in structural frameworks for machinery guards. It falls under HTS 7306.69.5000 as it is a welded tube of iron or nonalloy steel with noncircular cross-section and wall thickness less than 4 mm. The open-seamed or welded construction distinguishes it from seamless pipes.
Elliptical Welded Iron Steel Profile 45x20mm
Welded elliptical hollow profile from iron or nonalloy steel (45mm major x 20mm minor axis) with 1.5 mm wall thickness, used in greenhouse frameworks. Classified in HTS 7306.69.5000 for noncircular ellipse, welded, and <4mm wall specs. Fits 'other tubes and hollow profiles'.
Rectangular Thin-Wall Steel Tube for Gym Equipment
Welded 40x20mm rectangular tube of nonalloy steel with 2 mm walls, tailored for fitness equipment frames like treadmill bases. HTS 7306.69.5000 due to noncircular rectangle, welded, thin wall. Excludes fitness machines themselves.
Square Nonalloy Steel Hollow Section 50x50mm
A welded square tube (50mm x 50mm cross-section) from nonalloy steel with 3 mm wall thickness, commonly used in furniture frames and shelving. Classified under HTS 7306.69.5000 for its welded construction, noncircular square profile, and thin wall. It meets the definition of 'other tubes, pipes and hollow profiles' excluding circular shapes.
Oval Welded Steel Tube for Handrails 60x30mm
Welded oval hollow profile (60mm x 30mm) of nonalloy steel with 2.5 mm wall, designed for architectural handrails and balustrades. It qualifies for HTS 7306.69.5000 due to noncircular oval section, welded seam, and thin wall thickness under 4 mm. Excludes pressure-rated pipes.
D-Shaped Nonalloy Steel Tube 40x20mm
Welded D-shaped hollow tube of iron or nonalloy steel (40mm height x 20mm width) with 1.8 mm wall thickness, used in automotive trim and signage frames. Fits HTS 7306.69.5000 as a noncircular welded profile with thin walls. Distinct from standard square or rectangular sections.