Pressure-Resistant Alloy Pipe 16-inch OD
Welded alloy steel pipe, 406 mm OD (max for subheading), 4 mm wall thickness, rated for medium-pressure fluid transfer. Classifies in HTS 7306.50.50.70 as welded, circular, other alloy steel tube with qualifying dimensions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with threaded ends
Threaded or socket-welded variants use 7306.50.50.50.
If of stainless steel
Stainless fittings/tubes classify under 7307.19 for pipe fittings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify pressure ratings with hydrostatic test reports for compliance
• Avoid threading ends pre-import, as fittings could change to tube fittings classification
• Track alloy grade (e.g
• Grade B) for AD/CVD applicability
Related Products under HTS 7306.50.50.70
Welded Alloy Steel Pipe 6-inch OD
A welded circular tube of alloy steel with an outside diameter of 152.4 mm (6 inches) and wall thickness over 1.65 mm, used for structural piping in construction. It falls under HTS 7306.50.50.70 due to its welded construction, alloy steel material, circular cross-section, and specified diameter range exceeding 114.3 mm but not over 406.4 mm.
Alloy Steel Welded Tube 8-inch OD
Welded tube of other alloy steel, 203.2 mm (8 inches) outside diameter, wall thickness 2.5 mm, designed for mechanical tubing in machinery. Classified in 7306.50.50.70 for welded, circular, alloy steel tubes with OD 114.3-406.4 mm and sufficient wall thickness.
Structural Alloy Steel Pipe 12-inch OD
Heavy-duty welded pipe of alloy steel, 304.8 mm (12 inches) OD, wall 3 mm thick, for building frameworks and bridges. Fits HTS 7306.50.50.70 as other welded circular alloy steel tubes in the 114.3-406.4 mm OD range with wall ≥1.65 mm.
Construction Welded Alloy Tube 200 mm OD
Metric-sized welded alloy steel tube, 200 mm OD, 2.2 mm wall, for scaffolding and structural supports. Meets 7306.50.50.70 criteria: welded, circular cross-section, alloy steel, OD in range.
Machinery Welded Alloy Tube 10-inch OD
Welded circular tube from ASTM A500 alloy steel, 254 mm (10 inches) OD, 2.8 mm wall, for hydraulic machinery frames. Under 7306.50.50.70 for its welded alloy construction, circular profile, and diameter specs.
Automotive Frame Alloy Pipe 150 mm OD
Welded high-strength low-alloy (HSLA) steel pipe, 150 mm OD, 2 mm wall, for heavy vehicle chassis. HTS 7306.50.50.70 applies to its welded circular alloy tube specs.