Construction Welded Alloy Tube 200 mm OD
Metric-sized welded alloy steel tube, 200 mm OD, 2.2 mm wall, for scaffolding and structural supports. Meets 7306.50.50.70 criteria: welded, circular cross-section, alloy steel, OD in range.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If stainless and smaller wall
Thin-wall stainless welded tubes under 7306.61.10.00.
If fabricated into articles
Finished steel structures classify as articles in 7326.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Galvanizing post-import avoids surface treatment reclassification
• Declare as 'other' not line pipe to stay in correct subheading
• Use ISPM-15 for wooden supports if bundled
Related Products under HTS 7306.50.50.70
Welded Alloy Steel Pipe 6-inch OD
A welded circular tube of alloy steel with an outside diameter of 152.4 mm (6 inches) and wall thickness over 1.65 mm, used for structural piping in construction. It falls under HTS 7306.50.50.70 due to its welded construction, alloy steel material, circular cross-section, and specified diameter range exceeding 114.3 mm but not over 406.4 mm.
Alloy Steel Welded Tube 8-inch OD
Welded tube of other alloy steel, 203.2 mm (8 inches) outside diameter, wall thickness 2.5 mm, designed for mechanical tubing in machinery. Classified in 7306.50.50.70 for welded, circular, alloy steel tubes with OD 114.3-406.4 mm and sufficient wall thickness.
Structural Alloy Steel Pipe 12-inch OD
Heavy-duty welded pipe of alloy steel, 304.8 mm (12 inches) OD, wall 3 mm thick, for building frameworks and bridges. Fits HTS 7306.50.50.70 as other welded circular alloy steel tubes in the 114.3-406.4 mm OD range with wall ≥1.65 mm.
Pressure-Resistant Alloy Pipe 16-inch OD
Welded alloy steel pipe, 406 mm OD (max for subheading), 4 mm wall thickness, rated for medium-pressure fluid transfer. Classifies in HTS 7306.50.50.70 as welded, circular, other alloy steel tube with qualifying dimensions.
Machinery Welded Alloy Tube 10-inch OD
Welded circular tube from ASTM A500 alloy steel, 254 mm (10 inches) OD, 2.8 mm wall, for hydraulic machinery frames. Under 7306.50.50.70 for its welded alloy construction, circular profile, and diameter specs.
Automotive Frame Alloy Pipe 150 mm OD
Welded high-strength low-alloy (HSLA) steel pipe, 150 mm OD, 2 mm wall, for heavy vehicle chassis. HTS 7306.50.50.70 applies to its welded circular alloy tube specs.