Galvanized Steel Handrail Section with Coupling

3.5-inch (88.9 mm) OD schedule 40 galvanized welded pipe with swage coupling for porch/stair handrails. Classifies in HTS 7306.30.50.27 as other galvanized welded circular tubes of iron/nonalloy steel, wall ≥1.65 mm, OD 50.8-114.3 mm, with coupling.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7304.29.10Same rate: 35%

If seamless construction

Handrail applications often use seamless for higher pressure ratings.

7306.30.50Same rate: 35%

If not galvanized

Plain welded steel tubes without zinc coating use different suffixes.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

ADA-compliant dimensions require specific engineering certs for commercial imports

Test for lead content in galvanization per CPSIA if consumer-contact

Bundle quantities affect classification—sets vs individual tubes

Related Products under HTS 7306.30.50.27

Galvanized Steel Fence Post with Coupling

A welded galvanized steel tube with an outside diameter of 2.5 inches (63.5 mm), wall thickness over 1.65 mm, and pre-attached coupling for connecting fence sections. Classified under HTS 7306.30.50.27 due to its galvanized finish, circular cross-section, welded construction from nonalloy steel, and inclusion of coupling. Primarily used in agricultural and residential fencing.

Galvanized Steel Guardrail Tube with Coupling

Welded galvanized tube, 3-inch (76.2 mm) OD, wall thickness 2 mm, with end coupling for highway guardrail assembly. Fits HTS 7306.30.50.27 as other galvanized welded circular tubes of nonalloy steel exceeding 50.8 mm OD up to 114.3 mm, imported with coupling.

Galvanized Steel Plumbing Riser with Coupling

2-inch (50.8 mm) OD galvanized welded steel riser pipe with threaded coupling for water supply lines in buildings. HTS 7306.30.50.27 applies to its galvanized, welded, circular nonalloy steel construction, wall >1.65 mm, OD 50.8-114.3 mm, imported coupled.

Galvanized Steel Trellis Pole with Coupling

Welded galvanized tube, 2.375-inch (60.3 mm) OD, 14-gauge wall (1.9 mm thick), with spear-point coupling for garden trellises. Under HTS 7306.30.50.27 for galvanized nonalloy welded circular tubes with coupling in specified diameter range.

Galvanized Steel Sprinkler Pipe with Coupling

2-inch (50.8 mm) OD galvanized welded steel pipe with threaded coupling for agricultural irrigation systems. HTS 7306.30.50.27 due to galvanized finish, circular welded nonalloy steel, wall thickness >1.65 mm, diameter specs, imported with coupling.

Galvanized Steel Flagpole Base with Coupling

4-inch (101.6 mm) OD heavy-wall galvanized tube with ground sleeve coupling for residential flagpoles. Fits HTS 7306.30.50.27 specifications for welded galvanized circular tubes, nonalloy steel, with coupling in 50.8-114.3 mm OD range.