Alloy Steel T-Section 125x125x12mm Hot-Rolled
T-profile hot-rolled section from alloy steel, maximum dimension 125 mm, for crane runway supports. HTS 7228.70.30.41 applies to such 'other' hot-rolled alloy shapes/sections ≥76 mm cross-section, no advanced processing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength steel per note (a)
High-strength specs (yield point thresholds by thickness) route to dedicated 7228.30 subheading.
If equipped with fittings for assembly
Sections with added hardware become Chapter 73 structures/equipment.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mill certificates must specify alloy elements; measure cross-section accurately
• Segregate from smaller sections to prevent mixing
Related Products under HTS 7228.70.30.41
Hot-Rolled Alloy Steel L-Angle 100x100x10mm
A hot-rolled L-shaped structural section made from alloy steel with a maximum cross-sectional dimension of 100 mm, used in construction framing. Classified under HTS 7228.70.30.41 as hot-rolled angles, shapes, and sections of alloy steel, not drilled, punched, or further advanced beyond rolling, with cross-section 76 mm or more. Meets Chapter 72 definition for alloy steel due to added elements like chromium and molybdenum.
Alloy Steel HSS Hollow Section 150x150x12mm Hot-Rolled
Hot-rolled hollow structural section (HSS) of alloy steel, square profile with 150 mm outer dimension, for load-bearing columns in buildings. Fits HTS 7228.70.30.41 as 'shapes and sections' of alloy steel, hot-rolled without drilling, punching, or advancement, cross-section over 76 mm. Excludes hollow drill bars specifically noted elsewhere.
Hot-Rolled Alloy Steel U-Channel 200x75x10mm
U-shaped channel section of hot-rolled alloy steel, 200 mm height with max cross-section over 76 mm, used in structural beams for bridges. Under HTS 7228.70.30.41 for hot-rolled alloy steel shapes/sections, not drilled/punched/advanced. Alloy per Chapter 72 notes with elements enhancing strength.
Hot-Rolled Alloy Steel Z-Purlin 150x50x3mm Thick
Z-shaped purlin profile of alloy steel, hot-rolled with 150 mm max dimension, for roofing support in industrial buildings. Classed in HTS 7228.70.30.41 as hot-rolled 'other' shapes/sections of alloy steel ≥76 mm.
Alloy Steel Unequal Angle 200x100x15mm Hot-Rolled
Unequal leg L-angle from hot-rolled alloy steel, 200x100 mm profile exceeding 76 mm cross-section, used in shipbuilding. HTS 7228.70.30.41 for such unadvanced alloy angles/shapes.