With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Other > Other: > With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7228.50.50.40
Cold-Finished 4140 Alloy Steel Round Bar 100 mm Diameter
A cold-finished round bar made from 4140 chrome-molybdenum alloy steel with a 100 mm diameter, used in machinery and automotive axles. Classified under HTS 7228.50.5040 as other bars and rods of alloy steel, not further worked than cold-formed or cold-finished, with cross-section between 76-228 mm. Meets alloy steel definition due to chromium and molybdenum content exceeding chapter note thresholds.
Cold-Formed 4340 Alloy Steel Shaft Bar 150 mm Diameter
Cold-formed 4340 nickel-chromium-molybdenum alloy steel bar with 150 mm diameter, ideal for aircraft landing gear and heavy machinery shafts. Falls under HTS 7228.50.5040 for other cold-finished alloy steel bars with 76-228 mm cross-section. Alloy status confirmed by elevated Cr, Ni, and Mo per Chapter 72 definitions.
Cold-Finished 8620 Alloy Steel Round Bar 80 mm Diameter
Cold-finished 8620 carburizing alloy steel bar, 80 mm diameter, used for gears and pinions in transmissions. HTS 7228.50.5040 applies to cold-formed alloy steel rods in 76-228 mm range, not further worked. Chromium and nickel content qualifies as alloy steel.
17-4 PH Stainless Alloy Steel Bar 120 mm Cross-Section
Cold-finished 17-4 PH precipitation-hardening stainless steel bar with 120 mm square cross-section for aerospace and valve stems. Under HTS 7228.50.5040 as other cold-finished alloy steel bars 76-228 mm, not further worked. High chromium qualifies under alloy steel definitions.
Cold-Formed Tool Steel H13 Round Bar 200 mm Diameter
H13 hot-work tool steel bar, cold-formed with 200 mm diameter for die casting molds and extrusion tooling. HTS 7228.50.5040 covers cold-finished other alloy steel bars 76-228 mm. Meets Chapter 72 note (e) tool steel criteria with high Cr and Mo content.
Cold-Finished 300M Alloy Steel Bar 90 mm Diameter
300M ultra-high strength alloy steel bar, cold-finished 90 mm diameter for aircraft landing gear components. Classified HTS 7228.50.5040 as other cold-finished alloy steel, 76-228 mm cross-section. Ni-Cr-Mo composition exceeds alloy thresholds.
EN24 Alloy Steel Cold Bar 180 mm Hexagonal Section
Cold-finished EN24 (817M40) alloy steel hexagonal bar, 180 mm across flats for forged components and shafts. HTS 7228.50.5040 for other alloy steel cold-formed bars 76-228 mm. Cr-Mo alloy composition standard.
Cold-Finished Maraging Steel Bar 110 mm Diameter
Maraging C250 steel bar cold-finished to 110 mm diameter for rocket motor cases and landing gear. Under HTS 7228.50.5040 as cold-finished other alloy steel bars 76-228 mm. Ultra-high strength Ni alloy steel.
4145 QT Alloy Steel Cold Bar 140 mm Round
4145 quenched-and-tempered alloy steel bar, cold-finished 140 mm diameter for drill collars and heavy shafts. HTS 7228.50.5040 applies to cold-formed alloy bars 76-228 mm, not further worked despite QT condition. Alloy via Cr-Mo content.
Cold-Formed 4330V Modified Alloy Bar 85 mm
4330V vacuum-melted modified alloy steel bar, cold-formed 85 mm diameter for helicopter transmissions. Classified HTS 7228.50.5040 for other cold-finished alloy steel 76-228 mm. Ni-Cr-Mo-V composition qualifies.
D2 Tool Steel Cold-Finished Bar 160 mm Square
D2 (1.2379) high-carbon high-chromium tool steel bar, cold-finished 160 mm square for shear blades. HTS 7228.50.5040 as cold-finished other alloy steel bars 76-228 mm. Meets tool steel note (e)(i) >1.2% C and >10.5% Cr.
Cold-Rolled 15-5 PH Stainless Alloy Bar 195 mm
15-5 PH martensitic precipitation hardening stainless bar, cold-rolled finish 195 mm diameter for pump shafts. Under HTS 7228.50.5040 as other cold-finished alloy steel 76-228 mm. Chromium qualifies alloy status.
HY-180 Alloy Steel Cold Bar 75 mm (Nominal 76+)
HY-180 high-yield strength alloy steel bar cold-finished to minimum 76 mm diameter for submarine hull forgings. HTS 7228.50.5040 for cold-finished alloy bars 76-228 mm range. Ni-Cr-Mo high-strength alloy.
Cold-Finished 52100 Ball Bearing Steel Bar 130 mm
52100 chrome alloy steel bar cold-finished 130 mm diameter for bearing races and rolls. HTS 7228.50.5040 as cold-finished other alloy steel 76-228 mm. Would qualify ball-bearing steel note (h) if exact specs met.
Nitralloy Alloy Steel Cold Bar 210 mm Diameter
Nitralloy 135M nitriding alloy steel bar cold-finished 210 mm diameter for aircraft engine shafts. Classified HTS 7228.50.5040 cold-finished alloy steel bars 76-228 mm. Cr-Mo-Al alloy for case hardening.