S7 Tool Steel Cold-Formed Round Bar
S7 shock-resisting tool steel round bar, cold-formed to 19 mm diameter, for impact tools. Under HTS 7228.50.10.80 as other tool steel bars (meeting carbon/chromium specs), cold-finished, ≥18 mm cross-section, without further surface treatments.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for hollow drill bars/rods
Hollow configurations for drilling classify separately from solid bars.
If ball-bearing steel
Specific alloy types like ball-bearing steel (precise C/Cr specs) have dedicated provisions.
If parts of machines
End-use as machine components may shift to Chapter 84/85 if not semi-finished.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for rust/discoloration; no duty allowance per chapter note on pre-entry damage
• Label with exact HTS and tool steel type to speed customs clearance
• Partner with accredited labs for pre-shipment alloy verification
Related Products under HTS 7228.50.10.80
Cold-Finished D2 Tool Steel Round Bar
A cold-finished round bar made from D2 tool steel, an alloy steel with high chromium and carbon content meeting tool steel definitions, featuring a diameter of 20 mm. Classified under HTS 7228.50.10.80 as other bars and rods of tool steel (not high-speed), cold-formed or cold-finished, with maximum cross-sectional dimension over 18 mm. Not further worked beyond cold-finishing per chapter notes.
A2 Tool Steel Cold-Drawn Flat Bar
Cold-drawn flat bar of A2 air-hardening tool steel (1% carbon, 5% chromium), 25 mm wide by 10 mm thick, used for dies and gauges. Falls under HTS 7228.50.10.80 for tool steel bars cold-finished with cross-sectional dimension over 18 mm, not further worked. Meets U.S. Note (e)(ii) tool steel criteria.
M2 Tool Steel Cold-Finished Hex Bar
Cold-finished hexagonal bar of M2 tool steel (meets general tool steel note via C/Cr), 21 mm across flats, for cutting tools. HTS 7228.50.10.80 covers such other tool steel bars cold-formed with max dimension over 18 mm.
L6 Tool Steel Cold-Formed Flat Stock
L6 nickel-improved tool steel cold-formed flat, 30 mm x 15 mm, for structural tools. HTS 7228.50.10.80 as tool steel (alloy per note e) cold-finished bar >18 mm dimension.
Cold-Finished CPM-M4 Tool Steel Round
CPM-M4 powder metallurgy tool steel round bar, cold-finished 25 mm diameter, high wear resistance. Under 7228.50.10.80 for other tool steel cold-formed bars ≥18 mm.
O1 Cold-Finished Tool Steel Square Bar
O1 oil-hardening tool steel square bar, cold-finished to 22 mm x 22 mm, for tool making and fixtures. HTS 7228.50.10.80 applies to such tool steel (U.S. Note e(iii): ≥0.85% C, 1-1.8% Mn) bars cold-formed, max dimension ≥18 mm, not further worked.