Zinc-Plated Alloy Tool Steel Strip for Razor Blades
Narrow 20 mm wide, 0.15 mm thick alloy tool steel strip electrolytically plated with zinc, certified for razor blade production meeting razor blade steel specs. Falls under HTS 7226.99.0110 as other alloy steel flat-rolled products under 600 mm width with electrolytic zinc coating. Tool steel composition per note (e) distinguishes from common alloy steels.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not certified for razor blade use
Without specific certification, falls into general 'other' zinc-plated alloy steel category
If stainless razor blade steel
Stainless versions with specific Cr content classified under silicon-electrical or razor blade steel provisions
If width <300 mm and further worked beyond plating
Additional processing beyond plating (polishing, coating) may shift to 'further worked' bars/rods
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include certification at entry time confirming use in razor blade manufacture per US note (d)
• Verify tool steel meets note (e) elemental composition requirements through chemical analysis
• Avoid rust discoloration claims as no duty allowance per chapter note
Related Products under HTS 7226.99.01.10
Electrolytically Zinc-Coated High-Strength Alloy Steel Strip
Flat-rolled alloy steel strip, width 450 mm, thickness 1.2 mm, with minimum yield point of 355 MPa per high-strength steel definition, electrolytically plated with zinc for corrosion resistance. Classified under HTS 7226.99.0110 as flat-rolled products of other alloy steel, width under 600 mm, electrolytically zinc-coated. The electrolytic zinc coating distinguishes it from hot-dipped galvanized products.
Electro-Zinc Coated Ball Bearing Alloy Steel Strip
Precision alloy steel strip 300 mm wide, 0.8 mm thick, meeting ball-bearing steel composition (0.95-1.13% C, 1.25-1.65% Cr), electrolytically zinc coated for corrosion protection. HTS 7226.99.0110 covers alloy steel flat-rolled products <600 mm width with electrolytic zinc plating. Ball-bearing steel per US note (h).
Galvannealed Zinc-Iron Alloy Coated Automotive Steel Strip
450 mm wide, 1.0 mm thick high-strength alloy steel strip with electrolytic zinc-iron alloy coating (galvannealed) for automotive structural parts. Classified HTS 7226.99.0110 as electrolytically plated alloy steel flat products <600 mm. Meets high-strength steel definition with yield point >355 MPa.
Zinc-Coated Chipper Knife Alloy Tool Steel Strip
380 mm wide chipper knife steel strip (0.48-0.55% C, 7.25-8.75% Cr, 1.25-1.75% Mo) electrolytically zinc coated for corrosion protection during machining. HTS 7226.99.0110 for alloy steel flat-rolled <600 mm with electrolytic zinc. Meets chipper knife steel definition per US note (f).
Electroplated Heat-Resisting Alloy Steel Narrow Strip
150 mm wide heat-resisting steel strip (<0.3% C, 4-10.5% Cr) with electrolytic zinc coating for furnace component fabrication. HTS 7226.99.0110 covers other alloy steel flat-rolled <600 mm zinc plated. Heat-resisting per US note (g).
Automotive Grade Zinc-Coated Alloy Steel for Door Beams
500 mm wide, 1.5 mm thick dual-phase high-strength alloy steel strip, electrolytically zinc coated for automotive door impact beams. HTS 7226.99.0110 as alloy flat-rolled <600 mm zinc plated. High-strength steel exceeding yield point requirements.