Electroplated Heat-Resisting Alloy Steel Narrow Strip
150 mm wide heat-resisting steel strip (<0.3% C, 4-10.5% Cr) with electrolytic zinc coating for furnace component fabrication. HTS 7226.99.0110 covers other alloy steel flat-rolled <600 mm zinc plated. Heat-resisting per US note (g).
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If stainless steel rather than alloy steel
Stainless with specific Cr/Ni falls under 7226.20; other alloys under 7226.99
If not flat-rolled but bars/rods
Different product forms (strip vs bar) classify under separate headings
If grain-oriented electrical steel
Silicon-electrical steels have separate provisions regardless of other alloying
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify low carbon content (<0.3%) essential for heat-resisting steel status
• Furnace component end-use supports classification but not required
• Monitor for additional coatings that constitute 'further worked' status
Related Products under HTS 7226.99.01.10
Electrolytically Zinc-Coated High-Strength Alloy Steel Strip
Flat-rolled alloy steel strip, width 450 mm, thickness 1.2 mm, with minimum yield point of 355 MPa per high-strength steel definition, electrolytically plated with zinc for corrosion resistance. Classified under HTS 7226.99.0110 as flat-rolled products of other alloy steel, width under 600 mm, electrolytically zinc-coated. The electrolytic zinc coating distinguishes it from hot-dipped galvanized products.
Zinc-Plated Alloy Tool Steel Strip for Razor Blades
Narrow 20 mm wide, 0.15 mm thick alloy tool steel strip electrolytically plated with zinc, certified for razor blade production meeting razor blade steel specs. Falls under HTS 7226.99.0110 as other alloy steel flat-rolled products under 600 mm width with electrolytic zinc coating. Tool steel composition per note (e) distinguishes from common alloy steels.
Electro-Zinc Coated Ball Bearing Alloy Steel Strip
Precision alloy steel strip 300 mm wide, 0.8 mm thick, meeting ball-bearing steel composition (0.95-1.13% C, 1.25-1.65% Cr), electrolytically zinc coated for corrosion protection. HTS 7226.99.0110 covers alloy steel flat-rolled products <600 mm width with electrolytic zinc plating. Ball-bearing steel per US note (h).
Galvannealed Zinc-Iron Alloy Coated Automotive Steel Strip
450 mm wide, 1.0 mm thick high-strength alloy steel strip with electrolytic zinc-iron alloy coating (galvannealed) for automotive structural parts. Classified HTS 7226.99.0110 as electrolytically plated alloy steel flat products <600 mm. Meets high-strength steel definition with yield point >355 MPa.
Zinc-Coated Chipper Knife Alloy Tool Steel Strip
380 mm wide chipper knife steel strip (0.48-0.55% C, 7.25-8.75% Cr, 1.25-1.75% Mo) electrolytically zinc coated for corrosion protection during machining. HTS 7226.99.0110 for alloy steel flat-rolled <600 mm with electrolytic zinc. Meets chipper knife steel definition per US note (f).
Automotive Grade Zinc-Coated Alloy Steel for Door Beams
500 mm wide, 1.5 mm thick dual-phase high-strength alloy steel strip, electrolytically zinc coated for automotive door impact beams. HTS 7226.99.0110 as alloy flat-rolled <600 mm zinc plated. High-strength steel exceeding yield point requirements.