Cold-Rolled Heat-Resisting Alloy Steel Strip 320mm Wide
Heat-resisting alloy steel strip cold-rolled, 320 mm wide x 0.8 mm thick, <0.3% C and 6% Cr for furnace parts. HTS 7226.92.50.00 covers cold-reduced other alloy steel flat-rolled products 300+ mm wide. Matches Chapter 72 note (g) heat-resisting steel criteria.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If stainless steel equivalent
≥10.5% Cr content classifies as stainless under Chapter 72, different angle/sections heading.
If chipper knife steel composition
Specific C/Cr/Mo/V range in note (f) for chipper knife steel gets dedicated subheading.
If electrical non-alloy steel
Lacks alloy elements, grain-oriented electrical steel uses different cold-rolled heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• 1
• Certify carbon <0.3% and Cr 4-10.5% per heat-resisting note (g). 2
• Confirm strip remains in coil or cut lengths without cladding/coating. 3
• No duty reduction for pre-entry rust per Chapter note
Related Products under HTS 7226.92.50.00
Cold-Rolled 301 Stainless Steel Sheet 400mm Wide
Flat-rolled 301 alloy steel sheet, cold-rolled, measuring 400 mm in width and 1.5 mm thick, used in automotive trim and appliances. Classified under HTS 7226.92.50.00 as alloy steel (not stainless), not further worked beyond cold-rolling, with width between 300-600 mm. Meets chapter definition for alloy steel due to controlled chromium and nickel content.
Cold-Reduced 6150 Alloy Steel Strip 350mm Wide
Cold-rolled 6150 chrome-vanadium alloy steel strip, 350 mm wide x 2 mm thick, for spring and machinery applications. Falls under HTS 7226.92.50.00 as 'other alloy steel' flat-rolled product, cold-reduced only, width 300 mm or more but under 600 mm. Alloy status from chromium and vanadium per chapter definitions.
Cold-Rolled High-Strength 355 MPa Steel Plate 450mm Wide
High-strength alloy steel plate cold-rolled to 3.5 mm thick x 450 mm wide, minimum yield 355 MPa for structural use. HTS 7226.92.50.00 applies to cold-reduced alloy steel flat products 300-600 mm wide, not further worked. Qualifies via Chapter 72 note (a) high-strength steel definition.
Cold-Reduced 4140 Chromium-Moly Steel Sheet 500mm Wide
4140 alloy steel sheet cold-rolled to 1.2 mm x 500 mm wide, used in gears and axles. Under HTS 7226.92.50.00 for other cold-rolled alloy steel flat products 300 mm+ width, <600 mm, no further working. Chromium-molybdenum content defines as alloy steel.
Cold-Reduced Silicon-Manganese Steel Sheet 380mm Wide
Cold-rolled silicon-manganese alloy steel sheet, 380 mm wide x 1.8 mm thick for transformer cores. Classified HTS 7226.92.50.00 as other alloy steel cold-reduced flat product, width 300-600 mm, not further worked. Si/Mn additions qualify as alloy per chapter scope.
Cold-Rolled 4340 Nickel-Chromium-Moly Steel Plate 420mm Wide
4340 Ni-Cr-Mo alloy steel plate cold-rolled to 2.5 mm x 420 mm wide for aircraft components. HTS 7226.92.50.00 for cold-rolled other alloy flat-rolled steel 300-600 mm wide. Alloy from multiple elements exceeding base steel composition.