Cold-Reduced 6150 Alloy Steel Strip 350mm Wide
Cold-rolled 6150 chrome-vanadium alloy steel strip, 350 mm wide x 2 mm thick, for spring and machinery applications. Falls under HTS 7226.92.50.00 as 'other alloy steel' flat-rolled product, cold-reduced only, width 300 mm or more but under 600 mm. Alloy status from chromium and vanadium per chapter definitions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sold as angles/profiles after hot-rolling
Different product form (not flat-rolled), shifts to bars/angles of alloy steel heading.
If width under 300 mm
Narrower width moves to 'less than 300 mm' subheading within same cold-rolled alloy steel category.
If further fabricated into tubes
Completed as seamless alloy steel tubes, not flat-rolled products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• 1
• Submit chemical analysis report proving alloy elements (Cr, V) exceed carbon steel thresholds. 2
• Confirm no heat treatment beyond cold-rolling to stay in 'not further worked' category. 3
• Watch for rust/discoloration—no duty allowance per Chapter 72 note
Related Products under HTS 7226.92.50.00
Cold-Rolled 301 Stainless Steel Sheet 400mm Wide
Flat-rolled 301 alloy steel sheet, cold-rolled, measuring 400 mm in width and 1.5 mm thick, used in automotive trim and appliances. Classified under HTS 7226.92.50.00 as alloy steel (not stainless), not further worked beyond cold-rolling, with width between 300-600 mm. Meets chapter definition for alloy steel due to controlled chromium and nickel content.
Cold-Rolled High-Strength 355 MPa Steel Plate 450mm Wide
High-strength alloy steel plate cold-rolled to 3.5 mm thick x 450 mm wide, minimum yield 355 MPa for structural use. HTS 7226.92.50.00 applies to cold-reduced alloy steel flat products 300-600 mm wide, not further worked. Qualifies via Chapter 72 note (a) high-strength steel definition.
Cold-Reduced 4140 Chromium-Moly Steel Sheet 500mm Wide
4140 alloy steel sheet cold-rolled to 1.2 mm x 500 mm wide, used in gears and axles. Under HTS 7226.92.50.00 for other cold-rolled alloy steel flat products 300 mm+ width, <600 mm, no further working. Chromium-molybdenum content defines as alloy steel.
Cold-Rolled Heat-Resisting Alloy Steel Strip 320mm Wide
Heat-resisting alloy steel strip cold-rolled, 320 mm wide x 0.8 mm thick, <0.3% C and 6% Cr for furnace parts. HTS 7226.92.50.00 covers cold-reduced other alloy steel flat-rolled products 300+ mm wide. Matches Chapter 72 note (g) heat-resisting steel criteria.
Cold-Reduced Silicon-Manganese Steel Sheet 380mm Wide
Cold-rolled silicon-manganese alloy steel sheet, 380 mm wide x 1.8 mm thick for transformer cores. Classified HTS 7226.92.50.00 as other alloy steel cold-reduced flat product, width 300-600 mm, not further worked. Si/Mn additions qualify as alloy per chapter scope.
Cold-Rolled 4340 Nickel-Chromium-Moly Steel Plate 420mm Wide
4340 Ni-Cr-Mo alloy steel plate cold-rolled to 2.5 mm x 420 mm wide for aircraft components. HTS 7226.92.50.00 for cold-rolled other alloy flat-rolled steel 300-600 mm wide. Alloy from multiple elements exceeding base steel composition.