H13 Cold-Reduced Tool Steel Sheet
H13 hot-work tool steel cold-reduced sheet, 220 mm wide, 2.5 mm thick, for molds. HTS 7226.92.30 as cold-rolled tool steel note (e)(ii): ≥0.3% C, 5% Cr, width <300 mm, no coatings.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled only, no cold reduction
Absence of cold-rolling keeps H13 tool steel in hot-rolled alloy category 7225.40.
If container-grade vs tool quality
Lower-spec alloy cold-rolled products for shipping containers classify as general plate, not tool steel.
If varnished for corrosion protection
Varnish coating = 'further worked' per Chapter note, moving to 'other' cold-rolled alloy steel.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Hot-work steels like H13 must prove cold-reduction step; hot-rolled versions go to 7225.40
• Document intended die/mold use but classify by composition, not end-use per GRI rules
Related Products under HTS 7226.92.30
D2 Cold-Rolled Tool Steel Sheet
Cold-rolled flat-rolled sheet of D2 tool steel (1.5% C, 12% Cr), width 200 mm, thickness 1.5 mm, not further worked beyond cold reduction. Classified under HTS 7226.92.30 as tool steel per U.S. note (e)(i) with >1.2% C and >10.5% Cr, width <300 mm.
A2 Cold-Rolled Tool Steel Plate
Cold-rolled plate of A2 tool steel (1% C, 5.25% Cr), 150 mm width, 2 mm thick, not in coils. Meets HTS 7226.92.30 as tool steel note (e)(ii): ≥0.3% C and 1.25-10.5% Cr, width <300 mm, cold-rolled only.
M2-Equivalent Cold-Rolled Tool Steel
Cold-rolled sheet of M2-type tool steel (0.85% C, 4% Cr, 5% Mo), 180 mm width. Fits HTS 7226.92.30: tool steel note (e)(ii)/(v), cold-reduced only, <300 mm wide for cutting tools.
O1 Cold-Reduced Tool Steel Strip
Cold-reduced strip of O1 tool steel (0.9% C, 1% Mn, 1% Cr), 250 mm wide, 0.8 mm thick, in coils, not further worked. HTS 7226.92.30 applies as tool steel per note (e)(iii) with ≥0.85% C and 1-1.8% Mn, width <300 mm.
CPM-M4 Cold-Reduced Tool Steel Sheet
Powder metallurgy CPM-M4 tool steel cold-reduced sheet, 280 mm wide, 1.2 mm thick, for dies. HTS 7226.92.30 for cold-rolled tool steel per note (e)(i)/(ii), width <300 mm, no further working like polishing.
S7 Cold-Rolled Tool Steel Strip
S7 shock-resisting tool steel cold-rolled strip, 100 mm width, 1 mm thick, for punches. Classifies HTS 7226.92.30: tool steel note (e)(v) ≥0.5% C and ≥3.5% Mo, cold-reduced, <300 mm wide.