H13 Tool Steel Cold-Rolled Flat
Cold-rolled H13 hot work tool steel flat stock, 3 mm x 250 mm for die casting molds. Classed HTS 7226.92.30.60 as cold-rolled tool steel <300 mm width. Note (e)(ii) tool steel with 0.3-1.2% C and 1.25-10.5% Cr (5% typical).
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not meeting tool steel elements
General cold-rolled alloy steel if lacking required C/Cr per note (e).
If further worked than cold-rolled
Any polishing, painting, or cladding = further worked per Chapter definition.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Hot-work tool steels scrutinized; provide full spec sheet matching note (e)
• Declare thickness accurately; thin gauges risk reclass to strip
• Use rust-preventive oil film (not coating) to stay 'not further worked'
Related Products under HTS 7226.92.30.60
A2 Tool Steel Cold-Rolled Sheet
Cold-rolled flat-rolled sheet of A2 tool steel (1.2363), measuring 250 mm wide and 1.5 mm thick, used for making dies and punches. Classified under HTS 7226.92.30.60 as flat-rolled alloy tool steel (not high-speed), cold-rolled but not further worked, width under 300 mm. Meets U.S. note (e) definition for tool steel with 1.0-1.2% carbon and 5% chromium.
D2 Tool Steel Cold-Reduced Strip
Cold-reduced strip of D2 tool steel (X153CrMoV12), 1.2 mm thick by 280 mm wide, for shear blades and knives. Fits HTS 7226.92.30.60 as other cold-rolled tool steel flat products under 300 mm width, not further worked. Qualifies as tool steel under note (e)(i) with >1.2% carbon and >10.5% chromium equivalent specs.
O1 Tool Steel Cold-Rolled Plate
Cold-rolled plate of O1 oil-hardening tool steel, 2 mm thick x 290 mm wide, for tooling and gauges. HTS 7226.92.30.60 applies to cold-rolled tool steel flats <300 mm wide, not further worked. Conforms to tool steel note (e)(iii) with ≥0.85% carbon and 1-1.8% manganese.
S7 Tool Steel Cold-Rolled Sheet
Cold-rolled sheet of S7 shock-resisting tool steel, 1.8 mm x 260 mm, for impact tools. Under HTS 7226.92.30.60 as other cold-rolled tool steel <300 mm wide. Tool steel per note (e)(v) with ≥0.5% C and ≥3.5% molybdenum.
CPM-M4 Tool Steel Cold-Reduced Strip
Cold-reduced strip of CPM-M4 powder metallurgy tool steel, 0.8 mm x 295 mm wide for cutting tools. HTS 7226.92.30.60 for cold-rolled tool steel <300 mm, not further worked. Qualifies via note (e)(i) high Cr/carbon despite PM process.
A6 Tool Steel Cold-Rolled Sheet
Cold-rolled A6 tool steel sheet for balancing dimensional stability in fixtures, 1.6 mm x 280 mm. HTS 7226.92.30.60 covers such cold-rolled tool steel products <300 mm wide. Tool steel note (e)(iii) via high carbon/manganese balance.