A6 Tool Steel Cold-Rolled Sheet
Cold-rolled A6 tool steel sheet for balancing dimensional stability in fixtures, 1.6 mm x 280 mm. HTS 7226.92.30.60 covers such cold-rolled tool steel products <300 mm wide. Tool steel note (e)(iii) via high carbon/manganese balance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If silicon-electrical steel
Electrical steel compositions take precedence over tool steel elements.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Batch consistency certs prevent reclassification of mixed tool steels
• CBP may sample for surface treatment verification
Related Products under HTS 7226.92.30.60
A2 Tool Steel Cold-Rolled Sheet
Cold-rolled flat-rolled sheet of A2 tool steel (1.2363), measuring 250 mm wide and 1.5 mm thick, used for making dies and punches. Classified under HTS 7226.92.30.60 as flat-rolled alloy tool steel (not high-speed), cold-rolled but not further worked, width under 300 mm. Meets U.S. note (e) definition for tool steel with 1.0-1.2% carbon and 5% chromium.
D2 Tool Steel Cold-Reduced Strip
Cold-reduced strip of D2 tool steel (X153CrMoV12), 1.2 mm thick by 280 mm wide, for shear blades and knives. Fits HTS 7226.92.30.60 as other cold-rolled tool steel flat products under 300 mm width, not further worked. Qualifies as tool steel under note (e)(i) with >1.2% carbon and >10.5% chromium equivalent specs.
O1 Tool Steel Cold-Rolled Plate
Cold-rolled plate of O1 oil-hardening tool steel, 2 mm thick x 290 mm wide, for tooling and gauges. HTS 7226.92.30.60 applies to cold-rolled tool steel flats <300 mm wide, not further worked. Conforms to tool steel note (e)(iii) with ≥0.85% carbon and 1-1.8% manganese.
S7 Tool Steel Cold-Rolled Sheet
Cold-rolled sheet of S7 shock-resisting tool steel, 1.8 mm x 260 mm, for impact tools. Under HTS 7226.92.30.60 as other cold-rolled tool steel <300 mm wide. Tool steel per note (e)(v) with ≥0.5% C and ≥3.5% molybdenum.
CPM-M4 Tool Steel Cold-Reduced Strip
Cold-reduced strip of CPM-M4 powder metallurgy tool steel, 0.8 mm x 295 mm wide for cutting tools. HTS 7226.92.30.60 for cold-rolled tool steel <300 mm, not further worked. Qualifies via note (e)(i) high Cr/carbon despite PM process.
H13 Tool Steel Cold-Rolled Flat
Cold-rolled H13 hot work tool steel flat stock, 3 mm x 250 mm for die casting molds. Classed HTS 7226.92.30.60 as cold-rolled tool steel <300 mm width. Note (e)(ii) tool steel with 0.3-1.2% C and 1.25-10.5% Cr (5% typical).