Stainless Steel Hot-Rolled Z-Purlin Section 65x50x5mm
Z-shaped purlin hot-rolled stainless steel profile, max 65 mm section, for roofing supports in harsh climates. HTS 7222.40.30.85 applies to other hot-rolled stainless shapes under 80 mm, excluding drilled/punched. Aligns with Chapter 72 for primary mill products.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If plated or coated
Coated hot-rolled alloy shapes shift to Chapter 72 coated products per 'further worked' notes.
If pre-assembled into equipment
Panels/structures incorporating shapes classify as built-up assemblies in Chapter 73.
If cold-rolled
Cold-formed purlins use 7222.50 for other worked stainless bars/rods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use dimension drawings for CBP review; confirm no deformations qualifying as rebar per note (c)
• Bundle securely to prevent damage—no rust allowance
Related Products under HTS 7222.40.30.85
Stainless Steel Hot-Rolled Lip Channel 70x35x4.5mm
Hot-rolled lipped C-channel stainless steel section, 70 mm depth, for stud framing in construction. HTS 7222.40.30.85 for hot-rolled stainless shapes max <80 mm, not further advanced. Structural shape per tariff.
321 Stainless Hot-Rolled Tee Bar 55x55x6mm
321 stabilized stainless hot-rolled equal tee section, 55 mm cross-section, for high-temp exhaust supports. Under HTS 7222.40.30.85: other hot-rolled stainless shapes <80 mm. No punching/drilling.
Hot-Rolled 310 Stainless Hexagonal Section 65mm Across Flats
Hexagonal hot-rolled profile in 310 high-temp stainless steel, 65 mm max dimension, for furnace components. HTS 7222.40.30.85 covers other stainless shapes/sections hot-rolled <80 mm. Basic mill product.
Stainless Steel Hot-Rolled C-Purlin 75x50x5mm
C-shaped purlin hot-rolled stainless steel, 75 mm max, for corrosive environment roofing. Classifies HTS 7222.40.30.85 as hot-rolled shape <80 mm, not advanced. Structural section form.
17-4 PH Stainless Hot-Rolled Round Corner Flat 60x10mm
Precipitation-hardening 17-4 PH stainless hot-rolled flat with round corners, 60 mm width, for aerospace brackets. HTS 7222.40.30.85: other stainless shapes <80 mm hot-rolled. Fits shapes/sections category.
409 Stainless Hot-Rolled Lipped Z-Section 55x45x4mm
Lipped Z-section hot-rolled from 409 ferritic stainless, 55 mm max dimension, for automotive exhaust framing. Under HTS 7222.40.30.85 for stainless hot-rolled shapes <80 mm, no further processing. Automotive grade stainless.