Other
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: > Angles, shapes and sections: > Hot-rolled, not drilled, not punched and not otherwise advanced > With a maximum cross-sectional dimension of less than 80 mm: > Other
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7222.40.30.85
Stainless Steel Hot-Rolled Lip Channel 70x35x4.5mm
Hot-rolled lipped C-channel stainless steel section, 70 mm depth, for stud framing in construction. HTS 7222.40.30.85 for hot-rolled stainless shapes max <80 mm, not further advanced. Structural shape per tariff.
321 Stainless Hot-Rolled Tee Bar 55x55x6mm
321 stabilized stainless hot-rolled equal tee section, 55 mm cross-section, for high-temp exhaust supports. Under HTS 7222.40.30.85: other hot-rolled stainless shapes <80 mm. No punching/drilling.
Hot-Rolled 310 Stainless Hexagonal Section 65mm Across Flats
Hexagonal hot-rolled profile in 310 high-temp stainless steel, 65 mm max dimension, for furnace components. HTS 7222.40.30.85 covers other stainless shapes/sections hot-rolled <80 mm. Basic mill product.
Stainless Steel Hot-Rolled C-Purlin 75x50x5mm
C-shaped purlin hot-rolled stainless steel, 75 mm max, for corrosive environment roofing. Classifies HTS 7222.40.30.85 as hot-rolled shape <80 mm, not advanced. Structural section form.
17-4 PH Stainless Hot-Rolled Round Corner Flat 60x10mm
Precipitation-hardening 17-4 PH stainless hot-rolled flat with round corners, 60 mm width, for aerospace brackets. HTS 7222.40.30.85: other stainless shapes <80 mm hot-rolled. Fits shapes/sections category.
409 Stainless Hot-Rolled Lipped Z-Section 55x45x4mm
Lipped Z-section hot-rolled from 409 ferritic stainless, 55 mm max dimension, for automotive exhaust framing. Under HTS 7222.40.30.85 for stainless hot-rolled shapes <80 mm, no further processing. Automotive grade stainless.
Duplex 2205 Stainless Hot-Rolled Channel 50x25x4mm
Duplex 2205 stainless hot-rolled C-channel, 50 mm height max, for offshore structural use. Classifies in HTS 7222.40.30.85 as other stainless shapes hot-rolled <80 mm, no advancements. Duplex alloys qualify as stainless per chromium content.
Hot-Rolled Stainless Steel L-Angle 50x50x5mm
A hot-rolled L-shaped angle bar made of stainless steel with a maximum cross-sectional dimension of 50 mm, used in structural framing and machinery guards. It falls under HTS 7222.40.30.85 as a hot-rolled angle shape of stainless steel, not drilled, punched, or further advanced beyond rolling, with cross-section under 80 mm. This classification applies to basic structural sections per Chapter 72 notes.
Hot-Rolled 304 Stainless Steel U-Channel 75x45x5mm
Hot-rolled U-shaped channel section in 304 stainless steel, max dimension 75 mm, commonly used for framing in food processing equipment. Classified under HTS 7222.40.30.85 for hot-rolled stainless shapes not advanced beyond rolling and under 80 mm cross-section. Meets Chapter 72 definitions for stainless steel sections without drilling or punching.
Stainless Steel Hot-Rolled T-Section 60x60x6x8mm
T-shaped hot-rolled stainless steel section with 60 mm maximum dimension, ideal for lightweight structural supports in corrosive environments. HTS 7222.40.30.85 covers hot-rolled angles, shapes, and sections of stainless steel under 80 mm, not drilled or punched. Excludes further worked products as defined in Chapter notes.
316L Stainless Steel Hot-Rolled Equal Angle 40x40x4mm
Equal-leg angle bar hot-rolled from 316L stainless steel, 40 mm cross-section, for marine and chemical industry frameworks. Fits HTS 7222.40.30.85 as other hot-rolled stainless shapes under 80 mm, without punching or advancement. Stainless per Chapter 72 alloy definitions.
Hot-Rolled Stainless Steel HSS Hollow Section 70x70x3mm
Square hollow structural section (HSS) hot-rolled from stainless steel, 70 mm max dimension, used in architectural supports. Under HTS 7222.40.30.85 for hot-rolled stainless shapes/sections <80 mm, not advanced. Note: hollow shapes classified as sections if structural per tariff structure.
Stainless Steel Hot-Rolled Z-Purlin Section 65x50x5mm
Z-shaped purlin hot-rolled stainless steel profile, max 65 mm section, for roofing supports in harsh climates. HTS 7222.40.30.85 applies to other hot-rolled stainless shapes under 80 mm, excluding drilled/punched. Aligns with Chapter 72 for primary mill products.
430 Stainless Steel Hot-Rolled Flat Bar 75x8mm
Rectangular flat bar hot-rolled from 430 stainless steel, 75 mm width (max dimension), for trim and supports. Though 'bars and rods' separate, flat shapes <80 mm classify here as sections per practice; HTS 7222.40.30.85 for other hot-rolled stainless shapes. Not further worked.
304 Stainless Hot-Rolled Unequal Angle 60x40x5mm
Unequal leg L-angle hot-rolled in 304 stainless, 60 mm max cross-section, for bracketry in processing plants. HTS 7222.40.30.85: hot-rolled stainless angles/shapes <80 mm, not punched/drilled. Per notes, basic rolled form only.