Hot-Rolled 304 Stainless Steel H-Beam Section 200x100mm
Grade 304 stainless steel hot-rolled H-beam with 200mm height and 100mm flange width, maximum dimension over 80mm, not drilled or punched. Covered by HTS 7222.40.30.45 as other hot-rolled stainless shapes/sections. Applied in corrosion-resistant building structures.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked with surface treatments like polishing
Chapter notes define 'further worked' surface treatments moving product to 7228.
If made into angles/shapes of iron or non-alloy steel
Non-stainless compositions classify under universal mill plate or angle provisions in 7301.
If classified as tool steel alloy per U.S. note definitions
Specific alloy compositions meeting tool steel criteria shift to 7225 headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify exact grade (e.g
• 304) and provide heat number traceability for Customs verification; ensure no deformations from punching
• Common pitfall: rust/discoloration doesn't allow duty reduction per Chapter 72 note
Related Products under HTS 7222.40.30.45
Hot-Rolled Stainless Steel Angle Bar 100x100x10mm
A hot-rolled L-shaped stainless steel angle bar with 100mm leg lengths and 10mm thickness, featuring a maximum cross-sectional dimension over 80mm. Classified under HTS 7222.40.30.45 as hot-rolled angles of stainless steel, not drilled, punched, or further advanced beyond rolling. Used in structural frameworks and machinery supports.
Stainless Steel U-Channel 150x75x6.5mm Hot-Rolled
Hot-rolled stainless steel U-shaped channel section measuring 150mm height, 75mm width, 6.5mm thickness, with cross-section exceeding 80mm. Fits HTS 7222.40.30.45 for hot-rolled stainless shapes not advanced beyond rolling. Commonly used in construction framing and conveyor systems.
Stainless Steel T-Section Hot-Rolled 125x125x12mm
Hot-rolled T-profile stainless steel section with 125mm height and flange, 12mm thickness, exceeding 80mm cross-sectional dimension. HTS 7222.40.30.45 applies to such non-advanced hot-rolled stainless shapes. Used for marine and chemical plant frameworks.
316L Stainless Hot-Rolled Equal Angle 90x90x8mm
Marine-grade 316L stainless steel equal angle, hot-rolled, 90mm x 90mm x 8mm with max dimension >80mm, no drilling or advancement. Precisely matches HTS 7222.40.30.45 for hot-rolled stainless angles. Ideal for offshore platforms and food processing equipment.
Hot-Rolled Stainless Steel Z-Purlin 152x51x5mm
Z-shaped stainless steel purlin hot-rolled to 152mm web height, 51mm flange, 5mm thick, cross-section >80mm. HTS 7222.40.30.45 for other hot-rolled stainless sections not further advanced. Used in roofing and wall supports.
Duplex 2205 Stainless Steel Channel 200x80x8mm
High-strength duplex 2205 stainless hot-rolled channel, 200mm x 80mm x 8mm, max dimension over 80mm. Classifies in HTS 7222.40.30.45 as other stainless shapes hot-rolled without advancement. For heavy-duty corrosive environments.