Duplex 2205 Stainless Steel Channel 200x80x8mm
High-strength duplex 2205 stainless hot-rolled channel, 200mm x 80mm x 8mm, max dimension over 80mm. Classifies in HTS 7222.40.30.45 as other stainless shapes hot-rolled without advancement. For heavy-duty corrosive environments.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If smaller cross-sectional dimensions <80mm
Dimension threshold separates statistical suffixes in hot-rolled angles/shapes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for high-strength steel criteria per note (a) if thickness qualifies; declare alloy precisely
• No duty allowance for entry rust per Chapter rules
Related Products under HTS 7222.40.30.45
Hot-Rolled Stainless Steel Angle Bar 100x100x10mm
A hot-rolled L-shaped stainless steel angle bar with 100mm leg lengths and 10mm thickness, featuring a maximum cross-sectional dimension over 80mm. Classified under HTS 7222.40.30.45 as hot-rolled angles of stainless steel, not drilled, punched, or further advanced beyond rolling. Used in structural frameworks and machinery supports.
Stainless Steel U-Channel 150x75x6.5mm Hot-Rolled
Hot-rolled stainless steel U-shaped channel section measuring 150mm height, 75mm width, 6.5mm thickness, with cross-section exceeding 80mm. Fits HTS 7222.40.30.45 for hot-rolled stainless shapes not advanced beyond rolling. Commonly used in construction framing and conveyor systems.
Hot-Rolled 304 Stainless Steel H-Beam Section 200x100mm
Grade 304 stainless steel hot-rolled H-beam with 200mm height and 100mm flange width, maximum dimension over 80mm, not drilled or punched. Covered by HTS 7222.40.30.45 as other hot-rolled stainless shapes/sections. Applied in corrosion-resistant building structures.
Stainless Steel T-Section Hot-Rolled 125x125x12mm
Hot-rolled T-profile stainless steel section with 125mm height and flange, 12mm thickness, exceeding 80mm cross-sectional dimension. HTS 7222.40.30.45 applies to such non-advanced hot-rolled stainless shapes. Used for marine and chemical plant frameworks.
316L Stainless Hot-Rolled Equal Angle 90x90x8mm
Marine-grade 316L stainless steel equal angle, hot-rolled, 90mm x 90mm x 8mm with max dimension >80mm, no drilling or advancement. Precisely matches HTS 7222.40.30.45 for hot-rolled stainless angles. Ideal for offshore platforms and food processing equipment.
Hot-Rolled Stainless Steel Z-Purlin 152x51x5mm
Z-shaped stainless steel purlin hot-rolled to 152mm web height, 51mm flange, 5mm thick, cross-section >80mm. HTS 7222.40.30.45 for other hot-rolled stainless sections not further advanced. Used in roofing and wall supports.